Allied Telesis Overview of AT-8000GS Switch Models: Understanding the AT-8000GS/24 and AT-8000GS/48

Chapter 1: Overview

AT-8000GS/48The following figure illustrates the AT-8000GS/48 front panel.

Figure 5 AT-8000GS/48 Gigabit Ethernet Switch Front Panel

10/100/1000Base-T Ports		Power	Diagnostic
	SFP Ports LED			LED

1338

Stacking Mode

LEDs Mode Button

LEDs

The AT-8000GS/48 device front panel is configured as follows:

ˆ48 10/100/1000 Mbps ports — RJ-45 ports designated as 10/100/ 1000Mbps Base-T. The RJ-45 ports are designated as Ports 1-48.

ˆ4 SFP Ports — There are four 1000Base-X SFP combo ports. These ports are associated with the RJ-45 copper ports: 45, 46, 47, and 48.

ˆSelect Button — Selects the port LED indications.

The following figure illustrates the AT-8000GS/48 back panel.

Figure 6 AT-8000GS/48 Gigabit Ethernet Switch Back Panel

The AT-8000GS/48 back panel is configured as follows:

ˆPower Connector — AC power supply interface.

ˆ2 Stacking Ports — Two HDMI connector stacking ports .

ˆConsole Port — An RJ-45 connector supporting the RS-232 electrical specification.

ˆReset Button — Button to reset the device.

14