AT-8000GS Series Gigabit Ethernet Switch Installation Guide

Port Descriptions

10/100/1000 Base-

T Gigabit

Ethernet Ports

SFP Port

RJ-45 Console Port

The 10/100/1000Base-T Gigabit ports are RJ-45 ethernet connectors. The 10/100/1000 Mbps ports support half- and full-duplex mode.

Small Form Factor Pluggable (SFP) Optical Transceivers are integrated duplex data links for bi-directional communication over optical fiber, designed for high-speed Fiber Channel data links. The SFP port is designated as 100Base-FX or 1000Base-LX/SX.

Table 1 lists the supported SFPs:

 

Table 1 SFP Support

 

 

ATI Reference

Vendors and Parts

 

 

 

 

AT-SPSX

500m 850nm 1000Base-SX Small Form Pluggable -

 

Hot Swappable

 

 

AT-SPLX10

10km 1310nm 1000Base-LX Small Form Pluggable

 

- Hot Swappable

 

 

AT-SPLX40

40km 1310nm 1000Base-LX Small Form Pluggable

 

- Hot Swappable

 

 

AT-SPZX80

80km 1550nm 1000Base-ZX Small Form Pluggable

 

- Hot Swappable

 

 

AT-SPBD10-13

10km Bi-Directional GbE SMF SFP 1310Tx/1490Rx

 

- Hot Swappable

 

 

AT-SPBD10-14

10km Bi-Directional GbE SMF SFP 1490Tx/1310Rx

 

- Hot Swappable

 

 

The RJ-45 port on the rear panel is an asynchronous serial console port supporting the RS-232 electrical specification. The port is used to connect the device to a console managing the device. This interface configuration is as follows:

ˆEight data bits.

ˆOne stop bit.

ˆNo parity.

ˆBaud rate is 115,200 (default). The user can change the rate from 115,200 down to 2400 bps.

15

Page 15
Image 15
Allied Telesis AT-8000GS/POE manual Port Descriptions, 10/100/1000 Base Gigabit Ethernet Ports SFP Port, RJ-45 Console Port