Allied Telesis AT-8000GS/POE, AT-8000GS/24 manual

AT-8000GS Series Gigabit Ethernet Switch Installation Guide

The Startup Menu is displayed and contains the following configuration functions:

Startup Menu

[1]Download Software

[2]Erase Flash File

[3]Password Recovery Procedure

[4]Enter Diagnostic Mode

[5]Set Terminal Baud-Rate

[6]Stack menu

[7]Back

Enter your choice or press 'ESC' to exit:

6.From the Startup Menu, press “6”. The following prompt is displayed:

Stack menu

[1]Show box number in stack

[2]Set box number in stack

[3]Back

Enter your choice or press 'ESC' to exit:

7.From the Stack Menu, press “2”. The following prompt is displayed:

Enter your choice or press 'ESC' to exit:

Unit number in stack: [0-6] 1

8.Enter the unit stack number. Note that Units 1 and 2 are master-enabled units. One of them will be elected as Stack Master. Therefore, at least one unit in the stack must be designated as either Unit 1 or Unit 2.

9.Press <Enter>. The device is defined within the stack.

10.From the Stack menu, press “3”. The Startup menu is displayed.

11.From the Startup menu, press “7”. The Startup menu is closed and the device continues the Startup process.

Note

Once the device is booted up and operational in the stack, the configuration can be modified through the Web or CLI.

41