RJ-45 Port LEDs AT-8000GS/ 24POE
Figure 11 on page 21 illustrates the 10/100/1000 Base-T RJ-45 port LEDs for the AT-8000GS/24POE Gigabit Ethernet Switch.
Figure 11 RJ-45 Port LEDs for the AT-8000/24POE
Each RJ-45 port on the AT-8000GS/24POE Gigabit Ethernet Switch has two LEDs, one for Link/Activity and one for POE status. The LED indications are described in the following table:
Table 7 RJ-45 Port LED Indications for AT-8000/24POE
Port | LED | Description | |
Description | Indication | ||
| |||
|
|
| |
| Solid | 1000Mb/s link is established. | |
| Green |
| |
|
|
| |
| Flashing | 1000Mb/s activity on port. | |
| green |
| |
Left LED - |
|
| |
Solid | 10/100Mb/s link is established | ||
Link/Act | |||
amber |
| ||
|
| ||
|
|
| |
| Flashing | 10/100Mb/s link is established | |
| amber |
| |
|
|
| |
| Off | No link is established on the port. | |
|
|
| |
| Solid | Power Device (PD) is detected with a | |
| Green | normal load. | |
|
|
| |
| Solid | An overload, a terminal short or external | |
Right LED - | Amber | forced voltage feeds into the port. | |
POE |
|
| |
Flashing | PD is detected but power exceeds the max | ||
| |||
| amber | switch POE power budget. | |
|
|
| |
| Off | No PD is connected, and subsequently | |
|
| there is no power feeding. | |
|
|
|
21
