AT-8000GS Series Gigabit Ethernet Switch Installation Guide
Preparing for Installation
Installation Precautions
This section provides an explanation for preparing the installation site, and includes the following topics:
“Installation Precautions” on page 29
“Site Requirements” on page 30
“Unpacking” on page 30
Please review the the following saftey precautions before you begin to install the
The surface on which the switch is placed should be adequately secured to prevent it from becoming unstable and/or falling over.
Ensure the power source circuits are properly grounded.
Observe and follow service markings. Do not service any product except as explained in your system documentation. Opening or removing covers marked with a triangular symbol and a lighting bolt may cause electrical shock. These components are to be serviced by trained service technicians only.
Ensure the power cable, extension cable, and/or plug is not damaged.
Ensure the product is not exposed to water.
Ensure the device is not exposed to radiators and/or heat sources.
Do not push foreign objects into the device, as it may cause a fire or electric shock.
Use the device only with approved equipment.
Allow the product to cool before removing covers or touching internal equipment.
Ensure the switch does not overload the power circuits, wiring, and
Ensure the air flow around the front, sides, and back of the switch is not restricted.
Ensure the cooling vents are not blocked.
Do not install the switch in an environment where the operating ambient temperature might exceed 40ºC (104ºF).
29
