Auto IP Configuration, Default Gateway | Moxa Technologies PT-7728

PT-7728 User’s Manual			Featured Functions
	Auto IP Configuration

	Setting		Description		Factory Default
	Disable	Select this to set the PT-7728’s IP address
			manually.
	By DHCP	The PT-7728’s IP address will be assigned			Disable
			automatically by the network’s DHCP server.		Disable
			automatically by the network’s DHCP server.
	By BootP		The PT-7728’s IP address will be assigned
			automatically by the network’s BootP server.
	Switch IP Address
	Setting		Description		Factory Default
	IP address for the PT-7728		This assigns the PT-7728's IP address on a	192.168.127.253
			TCP/IP network.
	Switch Subnet Mask

	Setting		Description		Factory Default
	Subnet mask for the		This identifies the type of network to which the	255.255.255.0
	PT-7728		PT-7728 is connected (e.g., 255.255.0.0 for a
			Class B network, or 255.255.255.0 for a Class
			C network).
	Default Gateway

	Setting		Description		Factory Default
	IP address for gateway		This specifies the IP address of the router that		None
			connects the LAN to an outside network.
	DNS IP Address
	Setting		Description		Factory Default
	IP address for DNS server	This specifies the IP address of the DNS server			None
		used by your network. After specifying the
		DNS server’s IP address, you can use the
		PT-7728’s URL (e.g., www.PT.company.com)
			to open the web console instead of entering the
			IP address.
	IP address for 2nd DNS		This specifies the IP address of the secondary		None
	server		DNS server used by your network. The
			PT-7728 will use the secondary DNS server if
			the first DNS server fails to connect.

3-7

Image 21

Moxa Technologies PT-7728 Auto IP Configuration, Switch IP Address, Switch Subnet Mask, Default Gateway, DNS IP Address

Contents

First Edition, February Moxa Inc Moxa PowerTrans Switch PT-7728 User’s Manual Copyright Notice TrademarksDisclaimer Table of Contents Appendix a MIB Groups Appendix B Specifications Introduction ‰ Overview ‰ Package Checklist ‰ Software Features Package Checklist Software FeaturesOverview Getting Started Serial Console Configuration 115200, None, 8, 1, VT100 PT-7728 User’s Manual Getting Started Key Function Configuration by Telnet Console PT-7728 User’s Manual Getting Started PT-7728 User’s Manual Getting Started Configuration by Web Browser Disabling Telnet and Browser Access Featured Functions System Identification Configuring Basic Settings Password PasswordAccount Grant access to one host with a specific IP address Accessible IPGrant access to any host on a specific subnetwork Hosts That Need Access Input Format Port EnableDescription Name Network SpeedFDX Flow Ctrl Switch IP Address Auto IP ConfigurationSwitch Subnet Mask Default Gateway Daylight Saving Time TimeCurrent Time Current Date System File Update-By Remote Tftp Tftp Server IP/Name Configuration Files Path and NameFirmware Files Path and Name Log Files Path and Name Factory Default System File Update-By Local Import/Export Port Trunking Concept Using Port Trunking Trunk Group Maximum of 4 trunk groups Configuring Port TrunkingTrunk Type Available Ports/Member Ports Configuring Snmp Setting DescriptionTrunk Table Snmp Versions Snmp Read/Write SettingsV1, V2c Read Community V1, V2c Write/Read Community 1st Trap Server IP/Name Setting Description Factory Default Setting Description Factory Default Private MIB information Using Communication Redundancy Turbo Ring Concept Initial setup for Turbo Ring or Turbo Ring Turbo Ring with odd number switches Determining the Redundant Path for Turbo Ring Ring Coupling Configuration Switch B Configuring Turbo Ring and Turbo Ring Dual-Homing Configuration for Turbo RingConfiguring Turbo Ring Master/Slave Now ActiveRedundancy Protocol Set as Master Enable Ring Coupling Coupling PortCoupling Control Port Ring 1/2-Status Enable RingRing 1/2-1st Ring Port Status Ring 1/2-2nd Ring Port Status Coupling-Mode Primary/Backup Port Coupling Mode STP/RSTP Concept What is STP? PT-7728 User’s Manual Featured Functions How STP Works STP ConfigurationSTP Requirements Port Speed Path Cost 802.1D Edition 802.1w-2001 STP Reconfiguration Differences between Rstp and STPSTP Example Using STP on a Network with Multiple VLANs Root/Not Root Configuring STP/RSTPProtocol of Redundancy Bridge Priority Enable STP per Port Forwarding DelayHello Time sec Max. Age sec Configuration Limits of RSTP/STP Using Traffic PrioritizationWhat is Traffic Prioritization? Traffic Prioritization Concept Ieee 802.1p Priority Level Ieee 802.1D Traffic Type How Traffic Prioritization Works Differentiated Services DiffServ Traffic Marking Traffic PrioritizationTraffic Queues QoS Classification Configuring Traffic PrioritizationQueuing Mechanism Inspect TOS CoS Mapping Setting Description FactoryTOS/DiffServ Mapping Inspect COS Using Virtual LAN What is a VLAN?Virtual LAN Vlan Concept Benefits of VLANs VLANs and the PowerTransManaging a Vlan Communication Between VLANs VLANs Tagged and Untagged Membership Sample Applications of VLANs using PT-7728 PT-7728 User’s Manual Featured Functions Vlan Settings Configuring Virtual LANManagement Vlan ID Port Type What is an IP Multicast? Using Multicast FilteringConcept of Multicast Filtering Vlan Table Benefits of Multicast Multicast FilteringNetwork without multicast filtering Igmp Internet Group Management Protocol Snooping Mode Multicast Filtering and Moxa PowerTrans SwitchQuery Mode Network with multicast filtering Igmp Multicast Filtering Configuring Igmp SnoopingGmrp Garp Multicast Registration Protocol Static Multicast MAC Igmp Snooping Settings Add Static Multicast MAC Configuring Gmrp Using Bandwidth ManagementGmrp enable Gmrp Table Configuring Bandwidth Management Broadcast Storm Protection Traffic Rate Limiting SettingsIngress Configuring Static Port Lock Using Port Access ControlStatic Port Lock Ieee Database Option Configuring IeeeRadius Server Server Port Local User Database Setup 802.1X Re-Authentication Using Auto Warning Port Access Control TableLocal User Database Setup Event Type Configuring Email Warning MoxaPowerTransSwitch0001@SwitchLocation Email SetupPort Events Mail Server IP/Name Password Setting Configuring Relay WarningAccount Name Email Address Event Setup Using Set Device IP Using Line-Swap-Fast-RecoveryConfiguring Line-Swap Fast Recovery Override relay alarm settings Set up the connected devices Configuring Set Device IP Mirror Port Using Diagnosis Using Monitor Monitor by SwitchPing Monitor by Port Using the MAC Address Table MAC Using Event Log Syslog Server Using Syslog PT-7728 User’s Manual Featured Functions MIB II.2 Interfaces Group MIB II.1 System GroupMIB II.4 IP Group MIB II.5 Icmp Group MIB II.10 Transmission Group MIB II.11 Snmp GroupMIB II.17 dot1dBridge Group Private Traps Public Traps Switch Properties TechnologyInterface Optical Fiber 100BaseFX Power Warranty MechanicalEnvironmental