Moxa Technologies PT-7728 Forwarding Delay, Hello Time sec, Max. Age sec, Enable STP per Port

PT-7728 User’s Manual		Featured Functions
	Forwarding Delay
	Setting	Description	Factory Default
	Numerical value input by	This specifies the amount of time this device	15 (sec.)
	user	will wait before checking to see if it should
		change to a different state.
	Hello Time (sec.)
	Setting	Description	Factory Default
	Numerical value input by	This specifies the time interval between "hello"	2
	user	messages broadcast by the root of the Spanning
		Tree topology. The "hello" message is used to
		check if the topology is healthy.
	Max. Age (sec.)
	Setting	Description	Factory Default
	Numerical value input by	This specifies the amount of time to wait for a	20
	user	"hello" message from the root before the
		PT-7728 will reconfigure itself as a root. When
		two or more devices on the network are
		recognized as a root, the devices will
		renegotiate to set up a new Spanning Tree
		topology.
	Enable STP per Port
	Setting	Description	Factory Default
	Enable/Disable	This includes the selected port as a node on the	Disabled
		Spanning Tree topology.
NOTE	We suggest that you disable the Spanning Tree Protocol for ports that are connected directly to a
	device (PLC, RTU, etc.) as opposed to network equipment. This will prevent unnecessary
	negotiation.
	Port Priority
	Setting	Description	Factory Default
	Numerical value selected	This specifies the port’s priority as a node on	128
	by user	the Spanning Tree topology. Lower values
		correspond to higher priority.
	Port Cost
	Setting	Description	Factory Default
	Numerical value input by	This specifies the port cost. Higher costs	200000
	user	correspond to lower suitability as a node for the
		Spanning Tree topology.

3-33