Event Setup, System Events | Moxa Technologies PT-7728 specs

PT-7728 User’s Manual

Featured Functions

Event Setup

Event Types can be divided into two basic groups: System Events and Port Events. System Events are related to the overall function of the switch, whereas Port Events are related to the activity of a specific port.

The PT-7728 supports two relay outputs. You can configure which relay output is related to which events. This helps administrators identify the importance of the different events.

		System Events	Warning Relay output is triggered when…
		Power Transition (OnÆOff)	PT-7728 is powered on.
		Power Transition (OffÆOn)	PT-7728 is powered down.

		Port Events	Warning e-mail is sent when…
		Link-ON	The port is connected to another device.
		Link-OFF	The port is disconnected (e.g., the cable is pulled out,
		Link-OFF	or the opposing device shuts down).
			or the opposing device shuts down).
		Traffic-Overload	The port’s traffic surpasses the Traffic-Threshold for
		Traffic-Overload	that port (provided this item is Enabled).
			that port (provided this item is Enabled).
		Traffic-Threshold (%)	Enter a nonzero number if the port’s Traffic-Overload
		Traffic-Threshold (%)	item is Enabled.
			item is Enabled.
			A Traffic-Overload warning is sent every
		Traffic-Duration (sec.)	Traffic-Durationseconds if the average
		Traffic-Duration (sec.)	Traffic-Threshold is surpassed during that time
			Traffic-Threshold is surpassed during that time
			period.

NOTE	The Traffic-Overload,Traffic-Threshold (%), and Traffic-Duration (sec) Port Event items
	are related. If you Enable the Traffic-Overload event, then be sure to enter a nonzero

Traffic-Threshold percentage, as well as a Traffic-Duration between 1 and 300 seconds.

3-59

Image 73

Moxa Technologies PT-7728 user manual Event Setup, System Events

Contents

First Edition, February Moxa Inc Moxa PowerTrans Switch PT-7728 User’s Manual Trademarks Copyright NoticeDisclaimer Table of Contents Appendix a MIB Groups Appendix B Specifications Introduction ‰ Overview ‰ Package Checklist ‰ Software Features Software Features Package ChecklistOverview Getting Started Serial Console Configuration 115200, None, 8, 1, VT100 PT-7728 User’s Manual Getting Started Key Function Configuration by Telnet Console PT-7728 User’s Manual Getting Started PT-7728 User’s Manual Getting Started Configuration by Web Browser Disabling Telnet and Browser Access Featured Functions System Identification Configuring Basic Settings Password PasswordAccount Grant access to one host with a specific IP address Accessible IPGrant access to any host on a specific subnetwork Hosts That Need Access Input Format Port EnableDescription Name Speed NetworkFDX Flow Ctrl Switch IP Address Auto IP ConfigurationSwitch Subnet Mask Default Gateway Daylight Saving Time TimeCurrent Time Current Date System File Update-By Remote Tftp Tftp Server IP/Name Configuration Files Path and NameFirmware Files Path and Name Log Files Path and Name Factory Default System File Update-By Local Import/Export Port Trunking Concept Using Port Trunking Trunk Group Maximum of 4 trunk groups Configuring Port TrunkingTrunk Type Available Ports/Member Ports Setting Description Configuring SnmpTrunk Table Snmp Versions Snmp Read/Write SettingsV1, V2c Read Community V1, V2c Write/Read Community 1st Trap Server IP/Name Setting Description Factory Default Setting Description Factory Default Private MIB information Using Communication Redundancy Turbo Ring Concept Initial setup for Turbo Ring or Turbo Ring Turbo Ring with odd number switches Determining the Redundant Path for Turbo Ring Ring Coupling Configuration Switch B Dual-Homing Configuration for Turbo Ring Configuring Turbo Ring and Turbo RingConfiguring Turbo Ring Master/Slave Now ActiveRedundancy Protocol Set as Master Coupling Port Enable Ring CouplingCoupling Control Port Ring 1/2-Status Enable RingRing 1/2-1st Ring Port Status Ring 1/2-2nd Ring Port Status Coupling-Mode Primary/Backup Port Coupling Mode STP/RSTP Concept What is STP? PT-7728 User’s Manual Featured Functions How STP Works STP ConfigurationSTP Requirements Port Speed Path Cost 802.1D Edition 802.1w-2001 Differences between Rstp and STP STP ReconfigurationSTP Example Using STP on a Network with Multiple VLANs Root/Not Root Configuring STP/RSTPProtocol of Redundancy Bridge Priority Enable STP per Port Forwarding DelayHello Time sec Max. Age sec Configuration Limits of RSTP/STP Using Traffic PrioritizationWhat is Traffic Prioritization? Traffic Prioritization Concept Ieee 802.1p Priority Level Ieee 802.1D Traffic Type How Traffic Prioritization Works Traffic Prioritization Differentiated Services DiffServ Traffic MarkingTraffic Queues QoS Classification Configuring Traffic PrioritizationQueuing Mechanism Inspect TOS CoS Mapping Setting Description FactoryTOS/DiffServ Mapping Inspect COS What is a VLAN? Using Virtual LANVirtual LAN Vlan Concept Benefits of VLANs VLANs and the PowerTransManaging a Vlan Communication Between VLANs VLANs Tagged and Untagged Membership Sample Applications of VLANs using PT-7728 PT-7728 User’s Manual Featured Functions Vlan Settings Configuring Virtual LANManagement Vlan ID Port Type What is an IP Multicast? Using Multicast FilteringConcept of Multicast Filtering Vlan Table Multicast Filtering Benefits of MulticastNetwork without multicast filtering Igmp Internet Group Management Protocol Snooping Mode Multicast Filtering and Moxa PowerTrans SwitchQuery Mode Network with multicast filtering Igmp Multicast Filtering Configuring Igmp SnoopingGmrp Garp Multicast Registration Protocol Static Multicast MAC Igmp Snooping Settings Add Static Multicast MAC Configuring Gmrp Using Bandwidth ManagementGmrp enable Gmrp Table Traffic Rate Limiting Settings Configuring Bandwidth Management Broadcast Storm ProtectionIngress Configuring Static Port Lock Using Port Access ControlStatic Port Lock Ieee Database Option Configuring IeeeRadius Server Server Port Local User Database Setup 802.1X Re-Authentication Port Access Control Table Using Auto WarningLocal User Database Setup Event Type Configuring Email Warning MoxaPowerTransSwitch0001@SwitchLocation Email SetupPort Events Mail Server IP/Name Password Setting Configuring Relay WarningAccount Name Email Address Event Setup Using Set Device IP Using Line-Swap-Fast-RecoveryConfiguring Line-Swap Fast Recovery Override relay alarm settings Set up the connected devices Configuring Set Device IP Mirror Port Using Diagnosis Monitor by Switch Using MonitorPing Monitor by Port Using the MAC Address Table MAC Using Event Log Syslog Server Using Syslog PT-7728 User’s Manual Featured Functions MIB II.2 Interfaces Group MIB II.1 System GroupMIB II.4 IP Group MIB II.5 Icmp Group MIB II.11 Snmp Group MIB II.10 Transmission GroupMIB II.17 dot1dBridge Group Private Traps Public Traps Technology Switch PropertiesInterface Optical Fiber 100BaseFX Power Mechanical WarrantyEnvironmental