Moxa Technologies PT-7728 Port

PT-7728 User’s Manual Featured Functions

3-5

Port

Port settings are included to give the user control over port access, port transmission speed, flow

control, and port type (MDI or MDIX).

Enable

Setting Description Factory Default

Checked This allows data transmission through the port.

Unchecked This immediately shuts off port access. Enabled

ATTENTION

If a connected device or sub-network is wreaking havoc on the rest of the network, the Disable

option under Advanced Settings/Port gives the administrator a quick way to shut off access

through this port immediately.

Description

Setting Description Factory Default

Media type This displays the media type for each module’s

port N/A

Name

Setting Description Factory Default

Max. 63 characters This specifies an alias for the port to help

administrators differentiate between different

ports. Example: PLC 1

None

Contents

Main Moxa PowerTrans Switch PT-7728 Users Manual www.moxa.com/product First Edition, February 2008 Moxa Inc. Moxa PowerTrans Switch PT-7728 Users Manual Copyright Notice Trademarks Disclaimer Table of Contents Page Page Overview Package Checklist Software Features Page Serial Console Configuration (115200, None, 8, 1, VT100) Page Configuration by Telnet Console Page Page Configuration by Web Browser Disabling Telnet and Browser Access Page Configuring Basic Settings System Identification Password Accessible IP Port Network Page Time Daylight Saving Time System File UpdateBy Remote TFTP Page System File UpdateBy Local Import/Export Factory Default Using Port Trunking The Port Trunking Concept Configuring Port Trunking Configuring SNMP SNMP Read/Write Settings Trap Settings Private MIB information Using Communication Redundancy The Turbo Ring Concept Page Ring Coupling Configuration Page Dual-Homing Configuration for Turbo Ring V2 Configuring Turbo Ring and Turbo Ring V2 Configuring Turbo Ring Page Configuring Turbo Ring V2 Page Page The STP/RSTP Concept What is STP? Page How STP Works Differences between RSTP and STP STP Example PT-7728 Users Manual Featured Functions 3-31 Using STP on a Network with Multiple VLANs Block 802.1Q tagged, 10BaseTx half-duplex Link camies VLAN1, 2 (path cost = 100) Configuring STP/RSTP Page Configuration Limits of RSTP/STP Using Traffic Prioritization The Traffic Prioritization Concept What is Traffic Prioritization? How Traffic Prioritization Works Page Configuring Traffic Prioritization QoS Classification CoS Mapping TOS/DiffServ Mapping Using Virtual LAN The Virtual LAN (VLAN) Concept What is a VLAN? Benefits of VLANs VLANs and the PowerTrans Managing a VLAN Communication Between VLANs Sample Applications of VLANs using PT-7728 Page Configuring Virtual LAN VLAN Settings VLAN Table Using Multicast Filtering The Concept of Multicast Filtering What is an IP Multicast? Benefits of Multicast Multicast Filtering Multicast Filtering and Moxa PowerTrans Switch IGMP Multicast Filtering GMRP (GARP Multicast Registration Protocol) Configuring IGMP Snooping IGMP Snooping Settings Add Static Multicast MAC Configuring GMRP GMRP Table Using Bandwidth Management Configuring Bandwidth Management Broadcast Storm Protection Traffic Rate Limiting Settings Using Port Access Control Static Port Lock IEEE 802.1X The IEEE 802.1X Concept Configuring IEEE 802.1X 802.1X Re-Authentication Local User Database Setup Port Access Control Table Using Auto Warning Configuring Email Warning Event Type Email Setup Configuring Relay Warning Event Setup Override relay alarm settings Warning List Using Line-Swap-Fast-Recovery Configuring Line-Swap Fast Recovery Using Set Device IP Configuring Set Device IP Using Diagnosis Mirror Port Ping Using Monitor Monitor by Switch Monitor by Port Using the MAC Address Table Using Event Log Using Syslog Page A A Page Page B B