Moxa Technologies PT-7728 Ring 1/2-Status, Coupling-Mode, Coupling-Coupling Port status

PT-7728 User’s Manual				Featured Functions
	"Current Status" Items
	Now Active
	This shows which communication protocol is in use: Turbo Ring, Turbo Ring V2, RSTP, or
	none.
	Ring 1/2—Status
	This shows Healthy if the ring is operating normally, and shows Break if the ring’s backup link is
	active.
	Ring 1/2—Master/Slave
	This indicates whether or not the PT-7728 is the master of the Turbo Ring. This field appears only
	when selected to operate in Turbo Ring or Turbo Ring V2 mode.
NOTE	The user does not need to assign the master to use Turbo Ring or Turbo Ring V2. If no master is
	assigned, the Turbo Ring protocol will automatically assign master status to one of the PT series
	Ethernet switches in the ring. The master is only used to determine which segment serves as the
	backup path.
	Ring 1/2—1st Ring Port Status
	Ring 1/2—2nd Ring Port Status
	The Ports Status indicators show Forwarding for normal transmission, Blocking if this port is
	connected to a backup path and the path is blocked, and Link down if there is no connection.
	Coupling—Mode
	This indicates either None, Dual Homing, or Ring Coupling.
	Coupling—Coupling Port status
	This indicates either Primary, or Backup.
	"Settings" Items
	Redundancy Protocol
		Setting	Description	Factory Default
		Turbo Ring	This selects the Turbo Ring
			protocol.
		Turbo Ring V2	This selects the Turbo Ring V2
			protocol.	None
		RSTP (IEEE	This selects the RSTP protocol.
		802.1W/1D)
		None	This disables ring redundancy.
	Enable Ring 1
		Setting	Description	Factory Default
		Enabled	This enables Ring 1.	Not checked
		Disabled	This disables Ring 1.
	Enable Ring 2*
		Setting	Description	Factory Default
		Enabled	This enables Ring 2.	Not checked
		Disabled	This disables Ring 2.

3-25