TRENDnet TEW-511BRP, Dual-Band 802.11 a+g Wireless Reuter manual Test your Connection, 14English

Page 16

6. Test your Connection

Windows 2000/XP

NOTE: You should disconnect the RJ-45 Ethernet cable from your computer's LAN port if you wish to test your wireless connection.

1.Click the Start button; click Run, type “cmd” in the text-field, and press the Enter key.

2.At the command prompt, type “ipconfig” and press the Enter key.

3.If the application displays an IP address of “192.168.1.x,” your computer is connected to your access point.

4.Open your web browser, type www.trendnet.com (or another reliable URL) into the address bar, and press the Enter key. If the website appears, your router is successfully connected to the Internet.

NOTE: If your computer is not obtaining an IP address or is not connecting to the Internet, please retry the steps in the “Configure your AP/Router” section or refer to the troubleshooting section of this Quick Installation Guide.

14English

Page 15 Page 17
Image 16
Page 15 Page 17
Contents TEW-511BRP Table of Contents Verify Package Contents Prepare for InstallationVerify Equipment Pptp DSL Connection 2EnglishVerify Hardware Installation Install Hardware3English Windows 2000/XP 4English5English Windows 95/98/SE/ME 6English7English Configure your AP/Router 8EnglishAutomatic Configuration Dhcp 9EnglishPPPoE Static IP10English Pptp 11EnglishWireless Configuration 12EnglishConfigure your Wireless Network Adapter 13EnglishTest your Connection 14EnglishWindows 95/98/98SE/98ME 15EnglishTroubleshooting Important Note TRENDnet US/Canada Support Center European Support Center
Top Page Image Contents