TRENDnet TEW-511BRP, Dual-Band 802.11 a+g Wireless Reuter manual Windows 2000/XP, 4English

Page 6

3. Configure the computer's TCP/IP Settings

Windows 2000/XP

1.Click Start; click Settings and click on Control Panel

2.Double-Click the Network Connections icon.

3.Right-Click on the Local Area Connection icon, and then click on Properties. The Local Area Connection Properties box will appear.

4.Under the General Configuration Tab, locate and select TCP/IP, then click Properties. The Internet Protocol (TCP/IP) Properties box will appear.

NOTE: If you have a Fixed IP address connection, write down the existing IP addresses from the following sections before you make any changes.

5.Click on Obtain an IP address automatically and Obtain DNS Server address automatically.

4English

Image 6
Contents TEW-511BRP Table of Contents Prepare for Installation Verify Package Contents Verify Equipment Pptp DSL Connection 2EnglishInstall Hardware Verify Hardware Installation3English Windows 2000/XP 4English5English Windows 95/98/SE/ME 6English7English Configure your AP/Router 8EnglishAutomatic Configuration Dhcp 9EnglishStatic IP PPPoE10English Pptp 11EnglishWireless Configuration 12EnglishConfigure your Wireless Network Adapter 13EnglishTest your Connection 14EnglishWindows 95/98/98SE/98ME 15EnglishTroubleshooting Important Note TRENDnet US/Canada Support Center European Support Center