TRENDnet TK-802R, TRENDNET manual Daisy-Chain

ÐÓÑÑÊÈÉESPAÑOLDEUTSCHFRANÇAISENGLISH

Daisy-Chain

Note:

1.Must use the daisy chain cable provided with the KVM switch

2.Only daisy chain the KVM switch with another TK-802R

3.Stackable up to 16 KVM switches

6.Connect one end of the daisy-chain to the Daisy chain in port on the first (master) KVM switch.

Master

7.Connect the opposite end of the daisy-chain cable to the Console port on the second switch (slave1)

slave1

8.If you have a third KVM switch, connect one end of the daisy chain to the Daisy chain in port on the second KVM switch (Slave 1). Then connect the opposite end of the daisy-chain cable to the console port on the third switch (Slave 2). Repeat for each additional switch.

slave2

9.Press Port 1 button on the first (master) switch for 3 seconds to initialize the daisy chain.

3