MANUAL
DEH-P6900UB
MANUEL
Installation
Note:
•Check all connections and systems before final installation.
•Do not use unauthorized parts. The use of unauthorized parts may cause malfunctions.
•Consult with your dealer if installation requires drilling of holes or other modifications of the vehicle.
•Do not install this unit where:
—it may interfere with operation of the vehicle.
—it may cause injury to a passenger as a result of a sudden stop.
•The semiconductor laser will be damaged if it overheats. Install this unit away from hot places such as near the heater outlet.
•Optimum performance is obtained when the unit is installed at an angle of less than 60°.
60°
1.Insert the mounting sleeve into the dashboard.
•When installing in a shallow space, use a sup- plied mounting sleeve. If there is enough space behind the unit, use factory supplied mounting sleeve.
2.Secure the mounting sleeve by using a screwdriv- er to bend the metal tabs (90°) into place.
3.Install the unit as illustrated.
Removing the Unit
1.Extend top and bottom of the trim ring outwards to remove the trim ring. When reattaching the trim ring, push the trim ring onto the unit until it clicks. (If the trim ring is attached upside down, the trim ring will not fit properly.)
•It becomes easy to remove the trim ring if the front panel is released.
Trim ring
Le code de couleur des câbles utilisé pour ce produit est conforme à CEMA.
Printed in Thailand
Imprimé en Thaïlande
<KSNNX> <06K00000> |
DIN Front/Rear-mount
This unit can be properly installed either from “Front” (conventional DIN
DIN Front-mount
Installation with the rubber bush
Mounting sleeve
Dashboard
| 182 |
53 | Rubber bush |
Screw
2.Insert the supplied extraction keys into both sides of the unit until they click into place.
3.Pull the unit out of the dashboard.
