Pioneer DEH-P6900UB Tuner, Basic Operations, Adjusting the volume, Operating this unit

Section
02		Operating this unit
	! External unit refers to a Pioneer product (such		Tuner
		as one available in the future) that, although	Basic Operations
		incompatible as a source, enables control of
		basic functions by this unit. Two external units	1 2 3	4	5
		can be controlled by this unit. When two exter-
		nal units are connected, the allocation of
		them to external unit 1 or external unit 2 is
		automatically set by this unit.
	! When this unit’s blue/white lead is connected
		to the vehicle’s auto-antenna relay control
		terminal, the vehicle’s antenna extends when
			6
		this unit’s source is turned on. To retract the
		antenna, turn the source off.	1 Band indicator
			2 Stereo (5) indicator
	Adjusting the volume		Shows when the selected frequency is being
			broadcast in stereo.
	% Use MULTI-CONTROL to adjust the
			3 LOC indicator
	sound level.		Shows when local seek tuning is on.
			4 Preset number indicator
			5 Signal level indicator

Shows the radio wave strength.

6 Frequency indicator

1 Press SOURCE to select the tuner.

2 Press BAND to select a band.

Press BAND until the desired band (FM-1,

FM-2, FM-3 for FM or AM) is displayed.

3 To perform manual tuning, push MULTI-CONTROL left or right.

4 To perform seek tuning, push and hold MULTI-CONTROL left or right for about one second and release.

The tuner will scan the frequencies until a broadcast strong enough for good reception is found.

# You can cancel seek tuning by pushing MULTI-CONTROL left or right.

# If you push and hold MULTI-CONTROL left or right you can skip stations. Seek tuning starts as soon as you release MULTI-CONTROL.

12 En