Pioneer DEH-P6900UB Available accessories, SIRIUS Satellite Radio tuner, Basic Operations

Section

03 Available accessories

SIRIUS Satellite Radio tuner			3 To perform tuning, push
Basic Operations			MULTI-CONTROL left or right.
			The channels move up or down step by step.
You can use this unit to control a SIRIUS Satel-			Channels that cannot currently be selected
lite Radio tuner, which is sold separately.			are skipped, and the next channel is selected.
When the SIRIUS tuner is used together with			# If you push and hold MULTI-CONTROL left or
this unit, some operations differ slightly from			right, you can increase or decrease channel num-
those described in the SIRIUS operation man-			ber continuously.
ual. This manual provides information on			# You can also perform tuning from a desired
these points. For all other information on			channel category. (Refer to Selecting a channel in
using the SIRIUS tuner, please refer to the SIR-			the channel category on the next page.)
IUS operation manual.
! With this unit, you can operate one addi-			Note
tional function: SIRIUS channel direct se-			It may take a few seconds before you can hear
lection. Refer to Selecting a SIRIUS channel
			anything while this unit acquires and processes
directly on this page.
			the satellite signal when you change the source
1	2	3 4	to SIRIUS tuner or select a channel.

Selecting a SIRIUS channel directly

5

1SIRIUS band indicator

2SIRIUS channel number indicator

3 SIRIUS preset number indicator

4 SIRIUS channel select setting indicator Shows what channel select setting has been selected. CH is displayed when

Channel number is selected, and CAT is dis- played when Category is selected.

5 SIRIUS channel name

Shows the channel name of broadcast channel.

1Press SOURCE to select SIRIUS.

2Press BAND to select a SIRIUS band. Press BAND until the desired SIRIUS band is displayed, SR-1, SR-2 or SR-3.

When using the remote control, you can select the SIRIUS channel directly by entering the de- sired channel number.

1Press DIRECT.

Channel number input display appears.

2Press 0 to 9 buttons to enter the desired

channel number.

# You can cancel the input number by pressing

CLEAR.

3Press DIRECT.

The SIRIUS channel of entered number is selected.

#After entering the number input mode, if you do not perform an operation within about eight seconds, the mode is automatically canceled.

Introduction of advanced operations

1Press MULTI-CONTROL to display the main menu.

FUNCTION, AUDIO and ENTERTAINMENT appear on the display.

38 En