Connecting the Units
7When not connecting a rear speaker lead to a Subwoofer
1.5 m (4 ft. 9 in.) | 20 cm | |
USB cable |
| |
Connect the USB portable audio | 16 cm | |
player or USB memory (sold | ||
| ||
separately). |
| |
Front output | Rear output | |
| ||
| This product |
Antenna jack
Power amp (sold separately)
Power amp (sold separately)
Power amp (sold separately)
Subwoofer output
AUX jack (3.5 ø)
Use a stereo mini plug cable to connect with auxiliary equipment.
Wired remote input
Connect with RCA cables (sold separately)
Yellow/black
If you use an equipment with Mute function, wire this lead to the Audio
Blue/white
System remote control
Mute lead on that equipment. If not, keep the Audio Mute lead free of any connections.
Fuse (10 A)
Connect to system control terminal of the power amp or
Yellow
Connect to the constant 12 V supply terminal.
Fuse resistor
Red
Connect to terminal controlled by ignition switch (12 V DC).
Fuse resistor
Orange/white
Connect to lighting switch terminal.
Black (chassis ground)
Connect to a clean,
With a 2 speaker system, do not connect anything to the speaker leads that are not connected to speakers.
Perform these connections when using the optional amplifier.
Front speaker
Front speaker
Left
Rear speaker
Rear speaker
Subwoofer
+ | + |
| Front speaker |
≠ | ≠ |
White | Gray |
+ | + |
| Front speaker |
≠ | ≠ |
White/black | Gray/black |
| Right |
Green | Violet |
+ | + |
| Rear speaker |
≠ | ≠ |
Green/black | Violet/black |
+ | + |
| Rear speaker |
≠ | ≠ |
+ | + |
| Subwoofer |
≠ | ≠ |