Transition Networks manual Installation, Unpacking the 0401 Pocket Hub, Part Number

3. INSTALLATION

The 0401 Ethernet Pocket Hub is designed to draw power from the AUI port of a PC or hub. The 0401 Pocket Hub MUST be connected to an AUI port BEFORE the 10BaseT ports are allowed to be powered and active.

NOTE: 0401 Ethernet Pocket Hub Link Integrity cannot be disabled. All devices connected to the Pocket Hub MUST have link functions enabled.

To install the 0401 Ethernet Pocket Hub:

•Unpack the 0401 Pocket Hub.

•Connect 0401 Pocket Hub to 10BaseT Cable.

•Connect 0401 Pocket Hub to powered PC.

Direction is provided in the pages that follow.

Unpacking the 0401 Pocket Hub

The 0401 Ethernet Pocket Hub packing contents should include the following:

Item	Part Number
0401 Pocket Hub	E-TBT-HB-0401
User’s Guide	7345

Connecting Pocket Hub to 10BaseT Cable

To connect 10BaseT Cable to Pocket Hub RJ-45 connectors:

1.Locate or build 10BaseT cables with the following characteristics:

•802.3 compliant (See page 10)

•correct (straight through) cable configuration for site installation (See page 4)

•male RJ-45 plug connectors installed at both ends of cable.

2.Connect male RJ-45 plug connector at one end of 10BaseT cable to Pocket Hub RJ-45 jack connector.

3.Connect male RJ-45 plug connector at other end of 10BaseT cable to terminal device RJ-45 jack connector (using straight through cable orientation).

Straight-through 10BaseT

		N S I T I NO
Ethernet™	Pocket Hub™	T RA

5 Model 0401 Ethernet™ Pocket Hub™ 6