FRONT
FRONT
6.Grasp the base of the filter cartridge with the word “Front” facing you.
9.Push back on a downward arc until the filter cartridge stops.
FRONT
7.Lay the filter cartridge into the filterhead valve cradle.
FRONT
FRONT
10.Place the connector tube into the blue collet “water out” on the right side of the first assembled filterhead valve.
FRONT
FRONT
FRONT
FRONT
IMPORTANT:
Do not install the filter cartridge as shown below.
FRONT
FRONT
8.Push filter catridge up into the filterhead valve until it stops. The 2 colorstrips should be aligned (one in the filterhead valve cradle and one in the
filter cartridge).
How to insert tubing
in easy to connect fitting
Insert the tubing squarely. See figure A.
Make sure to insert tube completely. See figure B. Push in collet while removing tube. See figure C.
Tube | Collet | Body |
Figure A | Figure B | Figure C |
11. Take the “B” filterhead valve and place it at the top right of
1 the mounting bracket. Pressing the filterhead valve firmly against the mounting bracket, slide the unit downwards securing both the top and bottom tabs.
12. Slide the “B” filterhead valve to the left, making sure the
FRONT
2
connector tube goes into the “B” filterhead valve white collet “water in”. Slide to the left until it is centered on the second mounting bracket. (You should hear a slight click, when “B” filterhead valve is secure).
If you do not install the filter C, put the elbow fitting with the blue collet into “B” filterhead valve blue collet “water out”.
13. Repeat step 5 to install filter B.
9
