2
1
Layout 5
If you wish to add the UltraEase™ DirectHot™ unit
IMPORTANT:
12
14
3
6
13
5
4
10
11
9
8
7
A Dual temperature faucet included with the Direct Hot unit. It does not require the faucet model
1.Dual temperature faucet included with the DirectHot™ unit
2.Cold water supply line
3.White tubing with included DirectHot™ unit
4.Specialty filtration sold separately
5.Flow monitor included with DirectHot™ unit
6.“T” water line connector included with faucet
7.DirectChill™ unit
8.DirectHot™ unit
9.Yellow tubing
10.Red tubing
11.Blue tubing included with chiller
12.Wall mounting clips for tubing
13.White “water in” collet
14.Blue “water out” collet
Water Supply Requirements
If local codes permit, connect the UltraEase™ modular filtration system feed line to the cold water supply line with the ‘’T’’ connector (supplied with UltraEase™ faucets product number
If you are using the UltraEase™ filtration unit, the Directchill™ unit and/or the DirectHot™* unit should be connected after the filtration unit.
IMPORTANT: If local codes do not permit the use of the ‘’T’’ connector, special feed valves can be obtained from your local plumbing supply distributor. Do not connect the filters to the hot water line. This will ruin the filters. The water pressure to the DirectChill™ unit or DirectHot™* unit should not drop below 30 psi (min.) nor rise above 100 psi (max.).
*Delineated that the DirectHot™ unit is not tested or certified by NSF International.
6