Cable Specifications
Technical Specifications
Fiber cable
Bit error rate:
Single mode fiber (recommended): Multimode fiber (recommended): Multimode fiber (optional):
Fiber optic transmitter power: Fiber optic receiver sensitivity: Link budget:
Fiber optic transmitter power: Fiber optic receiver sensitivity: Link budget:
Fiber optic transmitter power: Fiber optic receiver sensitivity: Link budget:
Fiber optic transmitter power: Fiber optic receiver sensitivity: Link budget:
9µm 62.5/125 µm
100/140, 85/140, 50/125 µm
850 nm multimode |
|
min: | max: |
min: | max: |
8.5 dB |
|
850 nm multimode |
|
min: | max: |
min: | max: |
8.5 dB |
|
1310 nm single mode | |
min: | max: |
min: | max: |
10.5 dB |
|
1310 nm single mode | |
min: | max: |
min: | max: |
10.5 dB |
|
For models
Standards: | IEEE 802.3™, 802.1P, 802.1Q |
Expansion bus standard: | PCI 2.2 64/32 bit, 33/66Mhz standard |
Data rate | 1000Mbps fiber media |
LED: | LINK/ACT (on the bracket): |
| • ON = communication link; |
| • FLASHING = activity on link |
| FDX (on the bracket): ON = full duplex link |
Drivers: | • NetWare Server 4.x, 5.x; 6.x |
| • Netware DOS Client ODI |
| • Windows 98, 2000, 2003, NT4.0, XP |
| • Linux |
| • SCO UnixWare 7.1x |
| • OpenUnix 8.0 |
Boot server support: | PXE Boot ROM |
PCB dimensions: | 2.2” x 6.5” x .09” |
| (56 mm x 165 mm x 23 mm) |
Shipping weight: | 1 lb. (0.45 kg.) |
Power consumption: | 2.0A @ +5VDC |
MTBF | 127,234 hours (Bellcore7 V5.0) |
The fiber optic transmitters on the device meet Class I Laser safety requirements per
Opearting temp: | 0°C to 50°C (32°F to 122°F) |
Storage temp: | |
Humidity: | 5% to 95%, |
Altitude: | 0 to 10,000 feet |
Warranty: | Lifetime |
WARNING: Visible and invisible laser radiation when open: DO NOT stare into the beam or view directly with optical instruments. Failure to observe this warning could result in damage to your vision or blindness.
WARNING: Use of controls, adjustments, or the performance of procedures other than those specified herein may result in hazardous radiation exposure.
The information in this manual is subject to change without further notice. Go to www.transition.com/TransitionNetworks/Products2/Static/MediaConversion.aspx to check for updates to this manual by checking the revision level.
4 | Tech Support: |
| techsupport@transition.com | 5 |