Motorola Cloning Techniques for CLP1040 and CLP Series Radios

RADIO CLONING

Cloning Radios using the CLP Series Multi- Unit Charger (MUC) Kit P/N HKPN4007 (optional accessory)

Cloning the Radio through a Multi-Unit Charger

1.To put the source radio into clone mode, press and hold PTT and the “-” button while turning the radio ON until you hear the Cloning Tone and Double Blinking Orange on the Smart Status Glow.

2.Place the source radio into one of the charging pockets that has the “CLONE” label.

3.Turn the target radio ON and place it in the pairing charging pocket that has the “CLONE” label and start the cloning process.

4.Press the “Menu” button on the source radio to start the cloning process. The source radio generates the start clone tone.

5.Once the cloning is completed, turn the target radio OFF and back ON again in order to activate the radio.

6.To clone another radio, repeat steps 3, 4 and 5.

7.To exit clone mode on the source radio, turn the radio OFF.

24