TROUBLESHOOTING
Symptom | Try this |
|
|
Limited talk range | Steel and/or concrete structures, heavy foliage, buildings or |
| vehicles decrease range. Check for clear line of sight to |
| improve transmission. |
| Change location of radio. To increase range and coverage, you |
| can either reduce obstructions or increase power. |
| UHF radios provide greater coverage in industrial and |
| commercial buildings. |
| Increasing power provides greater signal range and increased |
| penetration through obstructions. |
|
|
Message not transmitted/ | Make sure the PTT button is completely pressed when |
received | transmitting. |
| Confirm that the radios have the same Channel, Frequency, |
| Interference Eliminator Code and Scramble Code settings. |
| Refer to “Transmitting and Receiving” Section on page 6. |
| Recharge, replace and/or reposition batteries. Refer to “About |
| the |
| Obstructions and operating indoors, or in vehicles, may |
| interfere. Change location. |
| Verify that the radio is not in Scan mode. Refer to “Scanning (*)” |
| Section on page 9. |
|
|
28
