Operation with Menu Settings, HOW to Step | Motorola CLP1040

OPERATION WITH MENU SETTINGS

Press Menu button to navigate through the Menu settings. Voice Assisted Operation feature is available on selected models. At any time in Menu mode, short press PTT or wait 3 seconds to exit the menu.

HOW TO...	STEP 1	STEP 2

Change Channel	Press Menu button to navigate to Channel.	Press +/- button to change
		channel.

Enter Monitor Mode	Press Menu button to navigate to Monitor.	Press +/- button to activate or
		deactivate Monitor.

Enter Scan Mode	Press Menu button to navigate to Scan.	Press +/- button to activate or
		deactivate Scan.

Send Call Tone (enabled	Press Menu button to navigate to Call	Press +/- button to send Call
through CPS)	Tone.	Tone.

Quick Tip: It is not necessary to wait for the voice prompt to be completed before continuing with next button press.

Note: For single channel models, only Monitor mode is available from Menu list. To activate, press and hold the Menu button; to deactivate, press and hold the Menu button again.

RADIO OVERVIEW

7

Image 15

Motorola CLP1040, CLP series, CLP1010 manual Operation with Menu Settings, HOW to Step

Contents

Page Disclaimer Document Copyrights Contents Radio Cloning Batteries and Chargers Safety InformationRadio Frequency Code Charts Motorola Limited Warranty Programming the Radio Through CPS Computer Software Copyrights Product Safety and RF Exposure Compliance Radio Frequency RF Exposure Safety Standards FCC Licensing Information FCC Licensing Information Introduction Radio Overview Getting Started Install the Battery Connecting an Audio Accessory Adjusting the Volume Installing and Removing the Swivel Belt Clip HolsterTurning the Radio On and Off Talk Range Transmitting and Receiving HOW to Step Operation with Menu Settings Selecting a Channel Default Channel Settings for CPS For CLP1040 multi-channel models Sending Call Tone enabled through CPSMonitoring a Channel For CLP1010 single-channel models Battery Life Battery and Charger FeaturesBattery Features About the Li-Ion Battery Battery Recycling and Disposal Power Supply, Adapter and Drop-in Tray Charger Removing the Lithium-Ion Li-Ion Battery Charging the Battery Charging a Standalone BatteryEstimated Charging Time Charging with the Drop-in Tray Single Unit Charger SUC Charging Status LEDs Charger LED Indicator LED Checking Battery Status Batteries Chargers Safety Information Operational Safety Guidelines Programming the Radio Programming the Radio Through CPSRadio Programming Overview Downloading the Customer Programming Software CPS Factory Default Settings Cloning Radio Settings Radio CloningCloning Instructions Radio Cloning What to do if cloning fails Cloning the Radio through a Multi-Unit Charger Programming the RPX through a Single Unit Charger CLP Repeater Capability Working with RPX Programming the RPX through a Multi-Unit Charger CLP Repeater Capability Working with RPX Symptom Try this Troubleshooting Can either reduce obstructions or increase power 13 and Charger LED Indicator Section on Cannot activate VOX VOX feature might be OFF If the portable is submerged in water USE and Care CLP UHF Frequencies Radio Frequency and Code Charts Radiofrequency CCTSS/DPL Interference Eliminator Codes DPL Motorola Limited Warranty for the United States What Does this Warranty Cover?Products and Accessories Exclusions WHO is COVERED? What WE will do to Correct Warranty ProblemsHOW to Obtain Warranty Service or Other INFORMATION? Software Retain Your Original Proof of Purchase Software Copyright Notice Export LAW Assurances Patent Notice Chargers AccessoriesCarry Accessories Batteries Accessories Page 68012000044