Transition Networks manual Installing the CPSMC0800-100 Chassis

Page 14

CPSMC0800-100 PointSystem™ Chassis

4 CPSMC0800-100 Chassis

4.1Installing the CPSMC0800-100 Chassis

The CPSMC0800-100 can be installed in a standard 19-inch rack or on a table, shelf, or other stable surface.

4.1.1Standard 19-inch Rack Installation

Flush Alignment

at front

NOTE: The maximum recommended ambient temperature (Tmra) for the 8-Slot chassis is 40°C. If the 8-Slot chassis is installed in a closed or mult-unit rack assem- bly, the operating ambient temperature of the the rack environment may be greater than room ambient. Consideration should be given to installing the 8-Slot chassis in an environment compatible with the Tmra.

CAUTION: Installation of the chassis in a rack should be such that the amount of air flow required for safe operation of the equipment is not compromised .

The 8-Slot chassis is designed so that the installation brackets can be installed to align the chassis either flush against the front or back edge of the rack or recessed from the front or back edge of the rack.

Recessed Alignment

at front

Flush Alignment

Recessed Alignment

at back

at back

WARNING: SELECT MOUNTING BRACKET LOCATIONS ON THE CHASSIS THAT WILL KEEP THE CHASSIS BALANCED WHEN MOUNTED IN THE RACK. FAILURE TO OBSERVE THIS WARNING COULD ALLOW THE CHASSIS TO FALL, RESULT- ING IN EQUIPMENT DAMAGE AND/OR POSSIBLE INJURY TO PERSONNEL.

CAUTION: Consideration should be given to the connection of the chassis to the supply circuit and the effect that overloading of the circuits might have on over- current protection and supply wiring. Appropriate consideration of equipment nameplates should be used when addressing this concern.

CAUTION: Reliable earthing of rack-mounted equipment should be maintained. Particular attention should be given to supply connections other than direct con- nections to the branch circuit (e.g., use of power strips).

chassis

Tech Support: 7am-6pm CST (GMT -6:00)1-800-260-1312 International: 00-1-952-941-7600

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Revision a Compliance Information CPSMC0800-100 PointSystem ChassisTable of Contents Introduction DescriptionUnpacking the CPSMC0800-100 Equipment IntroductionSlide-in-Modules Slide-in-modulesInstalling the Media Converter Slide-in-Modules Replacing the Media Converter Slide-in-Modules Three Types of Managment Modules Management ModulesSlide-in ModulesInstalling the Managment Modules 1a. CPSMM-200 Dual-Slot Master Management ModuleReplacing the Mangement Modules Power supply Powering the CPSMC0800-100Primary Power Supply Auxilliary Power Supply CPSMC0800-100 Chassis Installing the CPSMC0800-100 ChassisStandard 19-inch Rack Installation ChassisTable-Top Installation StepCascade Option Mgmt Master MCCM10Connecting the Slide-in-Modules to the Network Operation DB-9 Serial Port Snmp Agent in the Management ModuleSnmp Hardware Connections Snmp Software CPSMC0800-100 PointSystem Chassis RJ-45 Ethernet PortFault Isolation and Correction YESTechnical Specifications Power Consumption 60 WattsRJ-45 Cable Cable SpecificationsNull Modem Cable Transition Now Web-Based Seminars Contact UsTechnical Support MailWarranty Limited Lifetime WarrantyCPSMC0800-100 PointSystem Chassis
Related manuals
Manual 30 pages 26.95 Kb

CPSMC0800-100 specifications

Transition Networks CPSMC0800-100 is a versatile and robust media converter designed to enhance network connectivity in industrial environments. This device is particularly well-suited for users looking to improve the performance and reliability of their communication systems. With its ability to convert between different media types, the CPSMC0800-100 presents a myriad of applications for enterprise networks, security systems, and other critical infrastructures.

One of the standout features of the CPSMC0800-100 is its support for multiple media types. It seamlessly converts Ethernet signals between copper and fiber optics, allowing for flexible integration with existing network infrastructures. This capability is essential for organizations looking to extend their network reach, especially over long distances, without compromising on signal integrity.

The CPSMC0800-100 operates at speeds of up to 1 Gbps, making it suitable for high-performance applications. This speed is complemented by its low latency, ensuring that data is transmitted quickly and reliably. This is particularly important in environments where real-time data transmission is crucial, such as surveillance systems and industrial control networks.

Another key characteristic of this media converter is its robust design, optimized for harsh environmental conditions. With an extended temperature range, the CPSMC0800-100 can operate in temperatures ranging from -40°C to 75°C. This durability ensures that the device can function effectively in various settings, including factories, outdoor installations, and remote locations.

The CPSMC0800-100 is also equipped with advanced features such as IEEE 802.3az Energy Efficient Ethernet support. This technology helps lower power consumption, which is a significant consideration for organizations looking to reduce operational costs while maintaining network performance. Additionally, it has built-in LEDs for monitoring link activity and power status, enabling easy troubleshooting and maintenance.

Installation and configuration of the CPSMC0800-100 are made simple through its compact design and plug-and-play functionality. The device can be easily mounted in various locations, ensuring that deployment is quick and hassle-free. Overall, Transition Networks' CPSMC0800-100 media converter stands out as a reliable and effective solution for organizations aiming to enhance their network infrastructure with flexibility, speed, and durability. Whether for expanding existing networks or adapting to new technologies, this media converter is a valuable asset in modern communications.
Top Page Image Contents