Transition Networks manual CPSMC0800-100 PointSystem Chassis

Page 26

CPSMC0800-100 PointSystem™ Chassis

ty product(s) back to the customer (any and all customs charges, tariffs, or/and taxes are the customer's responsibility).

Before making any non-warranty repair, Transition Networks requires a $200.00 charge plus actual shipping costs to and from the customer. If the repair is greater than $200.00, an estimate is issued to the customer for authorization of repair. If no authorization is obtained, or the product is deemed not repairable, Transition Networks will retain the $200.00 service charge and return the product to the cus- tomer not repaired. Non-warranted products that are repaired by Transition Networks for a fee will carry a 180-day limited warranty. All warranty claims are subject to the restrictions and conventions set forth by this document.

Transition Networks reserves the right to charge for all testing and shipping incurred, if after testing, a return is classified as "No Problem Found."

THIS WARRANTY IS YOUR ONLY REMEDY. NO OTHER WARRANTIES, SUCH AS FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSED OR IMPLIED. Transition

NETWORKS IS NOT LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSSES, INCLUDING LOSS OF DATA, ARISING FROM ANY CAUSE OR THEORY. AUTHORIZED RESELLERS ARE NOT AUTHO- RIZED TO EXTEND ANY DIFFERENT WARRANTY ON TRANSITION NETWORKS' BEHALF.

26

Page 25 Page 26
Image 26
Page 25 Page 26
Contents Revision a Compliance Information CPSMC0800-100 PointSystem ChassisTable of Contents Introduction DescriptionUnpacking the CPSMC0800-100 Equipment IntroductionSlide-in-Modules Slide-in-modulesInstalling the Media Converter Slide-in-Modules Replacing the Media Converter Slide-in-Modules Three Types of Managment Modules Management ModulesSlide-in ModulesInstalling the Managment Modules 1a. CPSMM-200 Dual-Slot Master Management ModuleReplacing the Mangement Modules Power supply Powering the CPSMC0800-100Primary Power Supply Auxilliary Power Supply CPSMC0800-100 Chassis Installing the CPSMC0800-100 ChassisStandard 19-inch Rack Installation ChassisTable-Top Installation StepCascade Option Mgmt Master MCCM10Connecting the Slide-in-Modules to the Network Operation DB-9 Serial Port Snmp Agent in the Management ModuleSnmp Hardware Connections Snmp Software CPSMC0800-100 PointSystem Chassis RJ-45 Ethernet PortFault Isolation and Correction YESTechnical Specifications Power Consumption 60 WattsRJ-45 Cable Cable SpecificationsNull Modem Cable Transition Now Web-Based Seminars Contact UsTechnical Support MailWarranty Limited Lifetime WarrantyCPSMC0800-100 PointSystem Chassis
Related manuals
Manual 30 pages 26.95 Kb

CPSMC0800-100 specifications

Transition Networks CPSMC0800-100 is a versatile and robust media converter designed to enhance network connectivity in industrial environments. This device is particularly well-suited for users looking to improve the performance and reliability of their communication systems. With its ability to convert between different media types, the CPSMC0800-100 presents a myriad of applications for enterprise networks, security systems, and other critical infrastructures.

One of the standout features of the CPSMC0800-100 is its support for multiple media types. It seamlessly converts Ethernet signals between copper and fiber optics, allowing for flexible integration with existing network infrastructures. This capability is essential for organizations looking to extend their network reach, especially over long distances, without compromising on signal integrity.

The CPSMC0800-100 operates at speeds of up to 1 Gbps, making it suitable for high-performance applications. This speed is complemented by its low latency, ensuring that data is transmitted quickly and reliably. This is particularly important in environments where real-time data transmission is crucial, such as surveillance systems and industrial control networks.

Another key characteristic of this media converter is its robust design, optimized for harsh environmental conditions. With an extended temperature range, the CPSMC0800-100 can operate in temperatures ranging from -40°C to 75°C. This durability ensures that the device can function effectively in various settings, including factories, outdoor installations, and remote locations.

The CPSMC0800-100 is also equipped with advanced features such as IEEE 802.3az Energy Efficient Ethernet support. This technology helps lower power consumption, which is a significant consideration for organizations looking to reduce operational costs while maintaining network performance. Additionally, it has built-in LEDs for monitoring link activity and power status, enabling easy troubleshooting and maintenance.

Installation and configuration of the CPSMC0800-100 are made simple through its compact design and plug-and-play functionality. The device can be easily mounted in various locations, ensuring that deployment is quick and hassle-free. Overall, Transition Networks' CPSMC0800-100 media converter stands out as a reliable and effective solution for organizations aiming to enhance their network infrastructure with flexibility, speed, and durability. Whether for expanding existing networks or adapting to new technologies, this media converter is a valuable asset in modern communications.
Top Page Image Contents