Transition Networks SISTF10XX-160-LR(T) specifications Technical Specifications, Copper Cable

SISTF10xx-140-LR(T) / -160-LR(T) / -170-LR(T)

Cable Specifications -- Continued

Copper Cable

Category 5: (minimum requirement)

Gauge / Attenuation: 24 to 22 AWG / 22.0 dB per 100m @ 100 MHz

•Straight-through OR crossover cable may be used.

•Shielded twisted-pair (STP) OR unshielded twisted-pair (UTP) may be used

•Pins 1&2 and 3&6 are the two active pairs in an Ethernet network .

•RJ-45 Pin-out: Pin 1 = TD+, Pin 2 = TD-, Pin 3 = RD+, Pin 6 = RD-

•Use only dedicated wire pairs for the active pins:

(e.g., blue/white & white/blue, orange/white & white/orange, etc.)

•Do not use flat or silver satin wire.

	Straight-Through Cable				Crossover Cable
Twisted Pair #1		1	1	Twisted Pair #1	1	1
		2	2		2	2
Twisted Pair #2		3	3	Twisted Pair #2	3	3
		6	6		6	6

Technical Specifications

For use with Transition Networks Model Ethernet switch or equivalent

Standards: IEEE 802.3™, 802.3u™; 802.3x™

Data Rate: 10 Mb/s, 100 Mb/s (copper); 100 Mb/s (fiber)

Processing Type: Store and Forward

w/ IEEE802.3x™ full-duplex, non-blocking flow control

Dimensions: 1.8" x 5.3" x 4.1" (46 mm x 135 mm x 105 mm)

Weight:1.4 lb. (0.63 kg) (approximate)

Input Voltage: 12-48VDC, 0.2-0.7A, 2.4W (minimum), (redundant inputs)

Input Current: 0.25 A @ 24 VDC (SISTF10xx-140-LR(T))

0.35A @ 24 VDC (SISTF10xx-160-LR(T) / -170-LR(T))

Overload Current: 1.1 A (SISTF10xx-140-LR(T))

1.6A (SISTF10xx-160-LR(T) / -170-LR(T)) reverse polarity protection on all models

Forward & Filtering: 148810 pps
Packet Buffer:	256 KB
Address Table Size: 1000 Unicast MAC addresses
Latency:	< 5 ∝s
Alarm Relay:	1.0 A @ 24 VDC
Mechanical:	Ingress Protection: IP30
Environment:	Tmra* (standard temp):	0 to 60°C (32 to 140°F)
	Tmra* (extended temp):	-40 to 75°C (-40 to 167°F)
	Storage Temperature:	-40 to 85°C (-40 to 185°F)
	Humidity:	5 to 95%, non condensing
Warranty:	Lifetime

*Manufacturer’s rated ambient temperature.

The information contained in this user’s guide is subject to change. For the most up-to-date information see the user’s guide on line at: www.transition.com.

CAUTION: This device is intended to be supplied by a listed power unit marked LPS or Limited Power Source, provided with a connector for field wiring terminal, and output rated 12-48VDC, 0.2-0.7 A, 24 W minimum.

CAUTION: This device is designed for operation with a safety extra-low voltage (SELV) in compliance with IEC950 / EN60950 / VDE0805 and in compliance with the low voltage directive 73/23/EEC and 93/68/EEC.

14 24-hour Technical Support: 1-800-260-1312-- International: 00-1-952-941-7600 techsupport@transition.com -- Click the “Transition Now” link for a live Web chat. 15