Jabber: Flashing or lit LED indicates jabber on the line
Collision: Occasional or on LED indicates line collisions
Power: Lit LED indicates normal operation
FCC Regulations:
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harm- ful interference when the equipment is operated in a commercial envi- ronment. This equipment generates, uses, and can radiate radio fre- quency energy and, if not used in accordance with the instruction manu- al, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interfer- ence in which case the user will be required to correct the interference at his own cost.
NOTE: This digital apparatus does not exceed the Class A limits for radio noise for digital apparatus set out on the radio interference regula- tions of the Canadian Department of Communications.
Trademarks:
ST is a registered trademark of AT&T.
Ethernet is a registered trademark of Xerox Corporation, Inc.
Technical Support:
For more information about this product or other TRANSITION Networks products, call you local Transition distributor. Or contact us by phone at (612)
P/N 7320.A
Jabber: Flashing or lit LED indicates jabber on the line
Collision: Occasional or on LED indicates line collisions
Power: Lit LED indicates normal operation
FCC Regulations:
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harm- ful interference when the equipment is operated in a commercial envi- ronment. This equipment generates, uses, and can radiate radio fre- quency energy and, if not used in accordance with the instruction manu- al, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interfer- ence in which case the user will be required to correct the interference at his own cost
ETHERNET MULTIMEDIA
QUAD AUI FAN OUT
E-MUX-SA05
About the Multimedia Quad Fan Out:
The TRANSITION Networks Quad AUI Fan Out allows the user to inter- connect up to four workstations, hubs or fanouts together (five with the optional slide in card feature). The externally powered AUI Fan Out has four standard AUI
Coax, 10BaseT, or Fiber Optional Slide In Card (SIC)
Port 1 | Port 2 |
|
Transmit | Transmit |
|
Jabber | Jabber | Switch Settings |
|
| Switch setting |
|
| Loopback + SQE 1 |
|
| Loopback + No SQE 2 |
|
| No Loopback + No SQE 3 |
| Ethernet | Receive |
| Multimedia | |
| Collision | |
| Quad Fan Out | Power |
|
| |
Transmit | Transmit | TRANSITION |
E N G I N E E R I N G , I N C . | ||
Jabber | Jabber |
|
Port 3 | Port 4 |
|
External Power Connection
ETHERNET MULTIMEDIA
QUAD AUI FAN OUT
About the Multimedia Quad Fan Out:
The TRANSITION Networks Quad AUI Fan Out allows the user to inter- connect up to four workstations, hubs or fanouts together (five with the optional slide in card feature). The externally powered AUI Fan Out has four standard AUI