Troubleshooting
Diagnostics LEDs and Boot ROM
LEDS
The LINK/ACT LED lights when a fiber cable or twisted pair cable connection is good. It blinks to indicate activity.
The collision and
Boot ROM
To add the remote boot feature to a workstation, insert the Boot ROM into the ROM socket. See Figure 1 on page 2.
After power UP, the LINK/ACT LED should light; if not, check the following:
1Confirm that the
2Confirm that the PC is properly connected to a power source and with the power source turned ON.
3Check the fiber cable for proper connection.
4Contact Tech Support:
Note: To connect this device to a router, bridge, or switch, please refer to the corresponding technical manual for the device.
|
|
| Declaration of Conformity |
|
|
| |
|
|
| |
|
|
|
|
Name of Mfg: | Transition Networks, 6475 City West Parkway, | ||
|
| Minneapolis, MN 55344 U.S.A. | |
Model: | |||
Part Number: | |||
|
| ||
|
| ||
Regulation: | EMC Directive 89/336/EEC | ||
Purpose: | To declare that the | ||
|
| this declaration refers, is in conformity with the following | |
|
| standards: |
CISPR 22:1997+A1:2000; EN 55022:1998+A1:2000 Class A; FCC Part 15 Subpart B; 21CFR subpart J
I, the undersigned, hereby declare that the equipment specified above conforms to the above Directive(s) and Standard(s).
| June 30, 2005 |
Stephen Anderson, | Date |
Contact Us
Technical support
Technical support is available at techsupport@transition.com
• | US and Canada: | |
• | International: |
Transition now
Chat live via the Web with Transition Networks Technical Support. Log onto www.transition.com and click the Transition Now link.
Transition networks provides seminars via live,
Ask a question anytime by sending an email to our technical support staff: techsupport@transition.com
Address
Transition Networks
6475 City West Parkway Minneapolis, MN 55344, U.S.A.
Telephone:
Toll free:
Fax:952-941-2322
6 | Tech Support: |
| techsupport@transition.com | 7 |