Fujitsu SP10C, SP93GX, SP620C, SP600C, SP3091DC, SP3092DC, SP15C Step F Connecting the Scanner

Page 6

Fujitsu SCSI Scanner Installation Procedures

Windows 95\98\98SE\ME\2000\XP

Step F: Connecting the Scanner.

Warning! Before proceeding ensure that the power is off when connecting or disconnecting the SCSI cable to the scanner or workstation. Failure to follow the procedure above could result in damage to the SCSI card, scanner, and/or your system.

The default SCSI ID setting for the 5000/4000 series scanners is 5 and for the 3000 series scanners is 6. However, selecting a different SCSI ID may be required when there are several devices on a SCSI chain. Changing the SCSI ID will vary depending on the model that you have. On some models you change the SCSI ID by accessing the scanner’s Setup Menu through the front panel. On other models you physically change the SCSI ID selector on the back of the unit. Please consult your user manual for which method to use with your model. Setting the SCSI ID to 0, 1, or 7 is NOT recommended as these settings are typically reserved for hard drives and the SCSI host adapter.

Next if the scanner is the last device (only device) on the SCSI chain then it must be terminated. If the scanner is not the last device on the SCSI chain, then the terminator should be removed or turned off before connecting it to the next SCSI device. Many models of our scanners have automatic termination built in. Some of our older models will require a plug in terminator (see figure below). Please consult your user manual for which method to use with your model.

Typically the SCSI ports are located on the back of the scanner (the one exception being the Fi-5650C which is on the front). Depending on the model the SCSI port connector(s) may be any one of the following:

A.DB25 Pin

B.50-pin Centronics

C.50-pin High Density (HD-50) or

D.68-pin Wide SCSI.

Use the appropriate cable to connect the scanner to the SCSI controller in your PC and ensure that all connections are securely fastened. To identify the type of connector for

Rev051906A

Page 6 of 7

Page 5 Page 7
Image 6
Page 5 Page 7
Contents M3093GX\DG Fi-4530C Fi-5120C Step a Installing the Scsi Host Adapter AdaptecStep B Installing the Scsi drivers Adaptec Fi-4340C Fi-4990CDo not reboot at this time Installing the ASPI-Twain driver Step C Installing the drivers from the Setup CDInstalling the STI-Twain driver Do not reboot at this time Installing the Isis driverInstalling ScandAll Afterwards click on STI Twain Software DriversAfterwards click on Aspi Twain Software Drivers Installing the Isis driver Step E Unlocking the shipping lock Step F Connecting the Scanner Step H Installing third party software applications Step G Scanning with ScandAll

M3093GX\DG, M3099G\GX\GH, M3097G\G+\DG, FI-4120C\C2, FI-4220C\C2 specifications

The Fujitsu FI-4220C/C2, SP3092DC, M3097G/G+/DG, FI-4120C/C2, and SP10C are a range of high-performance document scanners known for their reliability and advanced features designed for various document management applications. These devices cater to the needs of businesses that require efficient and accurate scanning solutions.

One of the main features of the Fujitsu FI-4220C/C2 is its exceptional speed, capable of scanning up to 40 pages per minute (ppm) in both monochrome and color, while maintaining a high level of image quality. It utilizes an advanced image processing technology that enhances the clarity and readability of scanned documents. The scanner is equipped with a 50-sheet automatic document feeder (ADF), which allows for batch scanning, thereby significantly reducing processing time for large volumes of documents.

The SP3092DC and M3097G/G+/DG models also emphasize high-speed scanning capabilities, making them ideal for offices that require quick document capture. These devices support a variety of media types, including thick documents and embossed cards, thanks to their precise mechanical design that ensures reliable feeding and scanning.

The FI-4120C/C2 takes versatility a step further, providing options for duplex scanning and a range of connectivity options, including USB and network interfaces. This allows for flexible integration into existing IT infrastructures, making it suitable for both small businesses and large enterprises.

All models in this series feature advanced image enhancement technologies, such as automatic cropping, blank page removal, and multi-feed detection. These technologies help eliminate common scanning errors and reduce the time spent on manual corrections.

In terms of usability, Fujitsu has designed these scanners with user-friendly interfaces and software solutions that streamline workflow. Users can easily manage scanned documents with integrated document management software equipped with OCR (Optical Character Recognition) capabilities, enabling efficient text recognition and search functions.

Energy efficiency is another key characteristic of these scanners, as they comply with global energy standards. This commitment to sustainability ensures that the devices not only enhance productivity but also reduce the environmental impact of office operations.

Overall, the Fujitsu FI-4220C/C2, SP3092DC, M3097G/G+/DG, FI-4120C/C2, and SP10C offer a comprehensive set of features tailored to meet the diverse scanning needs of modern businesses, combining speed, accuracy, and ease of use in a reliable package.
Top Page Image Contents