3 Get started
Caution
•• Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in sequence.
If you contact Philips, you will be asked for the model and serial number of your apparatus.The model number and serial number are on the bottom of your apparatus. Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Option 1:AC power
Warning
•• Risk of product damage! Make sure that the power supply voltage corresponds to the voltage printed on the back or the underside of the unit.
•• Risk of electric shock! When you disconnect the AC power, always pull the plug from the socket. Never pull the cord.
Connect the AC power cord to:
•the AC~ MAINS socket on the unit.
•the wall socket.
Tip
•• To save energy, turn the unit off after use.
Prepare the remote control
For
Remove the protective tab to activate the remote control battery.
To replace the exhausted battery:
1
2
3
Connect power
The unit can be powered by either AC power or batteries.
Option 2: Battery power
Caution
•• Batteries contain chemical substances, so they should be disposed of properly.
Note
•• Batteries are not supplied with the accessories.
1 Open the battery compartment.
2 Insert 6 batteries (type:
7EN