Fujitsu FTP-608 Series, FTP-628 MCL101#21, FTP-628 MCL101#11 manual Specification

FTP-628MCL101#11/ #21

nSPECIFICATIONS

	Item	Specification
		FTP-628MCL101#11	FTP-628MCL101#21
Interface		Conforms to RS232C / Centronics
		4.2 to 8.5VDC,averagecurrent	2.7 to 7.2 VDC, averagecurrent
	For print head	2.4A (at 7.4 (3A)peak	1.9A (3.8A) peak
		Printing ratio: 12.5%, printing	Printing ratio: 12.5%, printing
Operating
		speed 60mm/sec. at 7.2 V	speed 40mm/sec. at 4.2 V
Voltage
	For motor	4.2 to 8.5 VDC, 1 A max.	2.7 to 7.2 VDC, 1 A max.
	For logic	2.7 to 5.25 VDC, 0.1 A maximum
External dimensions		70.2 x 33.0 x 15.5 mm (WxDxH)
Weight		Approximately 42g
		Pulse resistance: 100 million pulses/dot (under our standard
Head life		conditions). Abrasion resistance: paper traveling distance
		50km (print ratio: 25% or less)
	Operating temperature*	0˚ C to +50˚ C
Operating	Operating humidity	20 to 85% RH (no condensation)
environment
	Storage temperature	-20˚ C to +60˚ C (paper not included )
	Storage humidity	5 to 95% RH (no condensation )
Detection	Head temperature	Detected by thermistor
	detection
function
	Paper out/mark detection	Detected by photo-interrupter
		High sensitive paper:	TF50KS-E4 (Nippon Paper)
			TK50KS-E (Nippon Paper)
		Standard paper:	PD150R (Oji Paper)
			FTP-020P0107 (58mm)
			TK60KS-F1 (Nippon Paper)
Recommended thermal sensitive paper			FTP-020P0102 (58mm)
		Medium life storage paper:	PD170R (Oji Paper)
			AFP220VBB-1 (Mitsubishi
			Paper)
			PD160R-N (Oji Paper)
		Long life storage paper:	AFP-235 (Mitsubishi Paper)
			TP50KJ-R (Nippon Paper)
			HA112AA (Nippon Paper)

*+5˚C to +40˚C printing density assurance rance (-25 to 70˚C capability)