Fujitsu 637DCL Interface Board Connector PIN Assignment, Connector for logic power supply CN6

FTP-627/637DCL / DSL25x

■INTERFACE BOARD CONNECTOR PIN ASSIGNMENT

1.Connector for logic power supply (CN6)

Part number			: S3B-PH-SM3-TB (J.S.T) or equivalent (board side)
No.	Signal	I/O	Contents No.	No.	Signal	I/O	Contents No.
1	+5V	-	Power supply for logic	2	NC	-	No connection
3	GND	-	Ground

2. Connector for power supply for head/motor (CN7)

Part number					: S6B-XH-SM3-TB (J.S.T) or equivalent (board side)
No.	Signal		I/O		Contents No.	No.	Signal		I/O		Contents No.
1	+24V				Power supply for head	2	+24V			-	Power supply for head
				-
3	+24V				Power supply for head	4	GND	-			Ground
				-
5	GND	-			Ground	6	GND	-			Ground

3. Connector for paper near-end sensor detection (CN8)

Part number			: B2B-PH-SM3-TB (J.S.T) or equivalent (board side)
No.	Signal	I/O	Contents No.	No.	Signal	I/O	Contents No.
1	+5V	-	Power supply for logic	2	NES	I	Paper near-end detection signal

5