Fujitsu FTP-624MCL304, FTP-624MCL303, FTP-624DSL113 manual Guarantee +5C to +40C

FTP-624MCL303/304/FTP-624DSL113

(Continued)

	Item	Specifications
	For head	Voltage: 4.2-8.5 VDC
		Peak current: approx. 2.6 A (conditions: room temp., 7.2 VDC, 64 dots on)
	For motor	Voltage: 4.2-8.5 VDC
		Peak current: approx. 0.8 A (conditions: room temperature, 7.2 VDC)
Power
	For logic	Voltage: 5.0 VDC ± 5%
supply		Current: 0.2 A maximum
	For cutter	Voltage: 5.0 VDC ± 5%
		Current: Approximately 5.0A (in-rush)
		Approximately 1.0A (average)
Dimensions	Mechanism	97 (W) × 57 (D) × 38 (H) mm
	Interface board	131 (W) × 89 (D) × 24 (H) mm
Weight (Mechanism)		Approximately 280 g
	Mechanism	Pulse durability: 1 × 108 pulse/dot (using Fujitsu Takamisawa's standard
		driving method)
Expected life		Wear resistance: 50 km (at 25% print ratio)
	Cutter	300,000 cuts minimum
	Operating temperature	0 to +50°C*1
Environmental	Operating humidity	20 to 85% RH (no condensation)
		–20 to +60°C (excluding paper)
conditions	Storage temperature
	Storage humidity	5 to 95% RH (no condensation)
	Head temperature	By thermistor (applied energy control, abnormal temperature detection)
Detection	Paper out/Mark detect	By photointerrupter
	Head-up	By microswitch
		For front insertion use (58 mm width)	: FTP-020PU001, FTP-020P0104/
			P0701
		For rear insertion use (60 mm width)	: FTP-020P0020, FTP-020P0105/
			P0702
Recommended thermal sensitive paper		In Europe (58 mm width)	: FTP-021P0060-45
		· Oji Paper	: PD150R, PD160R-N, PD170R
		· NIPPON Paper	: TF50KS-E4,TF60KS-E,TF50KS-E
		· MITSUBISHI Paper Mills	: P220VBB-1, AFP-235

*1: Guarantee +5°C to +40°C.

3