Fujitsu FTP-624DSL113, FTP-624MCL304, FTP-624MCL303 manual Designation, General Specifications

FTP-624MCL303/304/FTP-624DSL113

■DESIGNATION

	Item	Part number
Printer mechanism		FTP-624MCL303/304*1
Interface board (Centronics /RS-232C)		FTP624DSL113*2
LSI	Micro Controller Unit	FTP-624CU112
	Thermal head cable	FTP-624Y001
Cables	Parallel interface cable	FTP-441Y201
	Serial interface cable	FTP-624Y301
	Power cables	FTP-621Y401
		FTP-621Y601

*1: 303 is for front paper insertion (curl path) and 304 is for rear paper insertion (straight path).

*2: Includes ANK+Kanji and Flash Memory.

■GENERAL SPECIFICATIONS

Item						Specifications
Part number			FTP-624MCL303/304
Printing method			Thermal-sensitive line dot method
Dot structure			384 dots/line
Dot pitch (Horizontal)			0.125 mm (8 dots/mm)—Dot density
Dot pitch (Vertical)			0.125 mm (8 dots/mm)—Line feed pitch
Effective printing area			48 mm
Paper width (MCL303)			58 mm
Paper width (MCL304)			60 mm
Paper thickness			60 to 100 μ m
Number of columns			32 columns/line (24 × 12 dot font)
Maximum printing speed			480 dotlines/s (60 mm/s)
			Conditions: 1 ply, printing on high sensitive thermal paper,
			8 columns of “H” /line, double density 16 × 8 dot font,
			room temperature, 8.5 VDC drive
			JIS ANK	:	128	International	: 195
Character types			ASCII	:	31
			JIS KANJI	: approximately 6800
Character, dimensions (H	×	W), number of	24 × 12 dots, (3.0 × 1.5 mm), 32 columns
			16 × 8 dots, (2.0 × 1.0 mm), 48 columns
characters
			16 × 16 dots, (2.0 × 2.0 mm), 24 columns
			24 × 24 dots, (3.0 × 3.0 mm), 16 columns
Interface			Centronics / RS-232C (selectable by dip swtich)

(Continued)

2