Fujitsu FTP-628MCL113 manual Specification

FTP-628MCL113

■SPECIFICATIONS

	Item		Specification
		FTP-628MCL113
Interface		Conforms to RS232C / Centronics
	For print head	4.2 VDC to 8.5 V, average current 0.87A (0.93), peak value
		Printing ratio: 12.5%, printing speed 50mm/sec. at 7.2 V
Operating
	For motor	4.2 VDC to 8.5 V, 1 A maximum
Voltage
	For logic	5 VDC ± 5%, 0.1 A maximum
Dimensions	Printer mechanism	75.1 x 38.4 x 15.5 mm (with platen set)
(WxDxH)	Interface board	69.3 x 52 x 15 mm
Weight	Printer mechanism	Approximately 51g
	Interface board	Approximately 20g
		Pulse resistance: 100 million pulses/dot (under our standard
Head life		conditions). Abrasion resistance: paper traveling distance
		50km (print ratio: 25% or less)
	Operating temperature*	0˚ C to +50˚ C
Operating	Operating humidity	20 to 85% RH (no condensation)
environment	Storage temperature	-20˚ C to +60˚ C (paper not included)
	Storage humidity	5 to 95% RH (no condensation)
	Head temperature	Detected by thermistor
	detection
Detection
	Paper out/mark detection	Detected by photo-interrupter
function
	Platen open/close	Slide switch
		High sensitive paper:		TF50KS-E4 (Nippon Paper)
				TK50KS-E (Nippon Paper)
		Standard paper:		PD150R (Oji Paper)
				FTP-020P0701 (58mm)
				TK60KS-F1 (Nippon Paper)
Recommended thermal sensitive paper				FTP-020P0102 (58mm)
		Medium life storage paper:		PD170R (Oji Paper)
				AFP220VBB-1 (Mitsubishi
				Paper)
				PD160R-N (Oji Paper)
		Long life storage paper:		AFP-235 (Mitsubishi Paper)
				TP50KJ-R (Nippon Paper)
				HA112AA (Nippon Paper)

*+5˚C to +40˚C printing density assurance rance (-25 to 70˚C capability)

3