Fujitsu FTP-627 Series manual Design, Not

FTP-627MCL Series

■SPECIFICATIONS

	Item				Specification
Interface		Conforms to RS232C / Centronics
	For print head	24 VDC ±5% average current, current approx. 1.1A (25 ˚ C,
		Rav=1500) 24V, simultaneously ON, 64 dots)
Power
	For motor of printer	24 VDC ±5%, 1A maximum
supply
	For motor of cutter	24 VDC ±5%, 1 A maximum
	For logic	5 VDC ± 5%, 0.2 A maximum
	Printer mechanism	83.5 x 35.7 x 15.5 mm (WxDxH), MCL003 (lever excluded)
Dimensions	Mechanism with cutter	83.5 x 43.0 x 26.4mm (WxDxH), (screws and cables are excluded)
	Interface board	131 x 89 x 24 mm
	Printer mechanism without	Approximately 55g
	cutter
Weight
	Printer mechanism with	Approximately 120g
	cutter
	NOT	Pulse resistance: 100 million pulses/dot (under our standard
		conditions). Abrasion resistance: paper traveling distance 50km
Life	Head
		(print ratio: 25% or less)
	Cutter	300,000 minimum
	Operating temperature	+5˚ C to +40˚	C (printing density assurance range, operation is
		possible at 0˚	C to +40˚		C)
Operating		FOR
	Operating humidity	20 to 85% RH (no condensation)
environment
	Storage temperature	-20˚ C to +60˚	C (paper not included)
	Storage humidity	5-95% RH (no condensation)
	Head temperature detection	Detected by thermistor
Detection
	Paper out/mark detection			NEW
function		Detected by photo-interrupter
	DESIGN
	Head up detectionDetected by slide-switch (003/004/303#1/303#2 only)
		High sensitive paper:			TF50KS-E4 (Nippon Paper)
		Standard paper:			F60KS-E (Nippon Paper)
					FTP-020PU001, FTP-020P0104 (58mm)
					PD150R (Oji Paper)
					FTP-020P0701(58mm)
Recommended thermal sensitive paper		Medium life storage			TF60KS-F1 (Nippon Paper)
		paper:			FTP-P0102 (58mm)
					PD170R (Oji Paper)
					P220VBB-1 (Mitsubishi Paper)
		Long life storage paper: PD60R-N (Oji Paper)
					AFP-235 (Mitsubishi Paper)
					TP50KJ-R (Nippon Paper)
					HA220AA (Mitsubishi Paper)

3