Precautions in Handling the Printer

WARNING

Please observe the following precautions for Powered USB cable.:

■Do not plug or unplug the Powered USB cable with a wet hand.

■Use the Powered USB cable only at the specified POS unit.

■Do not use a deformed or damaged the Powered USB cable.

■Do not move the printer while the printer power is on.

• Neglecting to handle properly may result in printer failure, emission of smoke, fire, or electric shock.

•An overload may cause the power cord to overheat or fire or the circuit breaker to trip.

■ Do not allow anything to rest on the power cord. Do not place the printer where the power cord will be trampled on.

■Do not use or carry the printer with its power cord bent, twisted, or

pulled.

■Do not attempt to modify the power cord unnecessarily.

■ Do not lay the Powered USB cable in the neighbor of a heating device.

• Neglecting these cautions may cause wires or insulation to break, which could result in leakage, electric shock, or printer failure. If the Powered USB cable sustains damage, contact your distributor.

■If the printer will not be used for a long time, pull out the Powered USB cable.

■Plug or unplug the power cord or signal cable after turning off the printer and the appliance connected to the printer.

— 5 —