Apply a thin layer of thermal grease on the VGA chipset.
NOTE) Most VGA chipsets on the VGA card have a concave curvature towards the middle and need more thermal grease at the center.
Make sure the VGA Block Base is level and firmly installed onto the VGA chipset using the Paper Washers, the VGA springs, and the VGA Finger Bolts A(M2.5).
Apply thermal grease evenly onto the grooves on the VGA Case Block Base that come in contact with the VGA Heatpipes, and install the VGA card on the motherboard.
NOTE) The VGA Case Block Base already has thermal grease coated underneath, and should not be taken off under normal circumstances.
