6) Installing the Heatpipe VGA Cooler
NOTE) If the VGA card interferes with certain components of the case, stop and refer to the following website (www.zalman.co.kr/product/TNN500AF.html), and replace the VGA card with one that is recommended.
As you install the VGA card, move the VGA Case Block Base vertically as needed to accommodate the VGA card.
Remove the Stock VGA Cooler on the VGA card and clean off the exposed contact surface completely.
NOTE) Be extremely careful when taking off the Stock VGA Cooler. Zalman is not responsible for any damages Due to user negligence during the Cooler’s removal.
