To Sacrifice the Remote Control Function

-Plug in the Dual USB-A and USB-B Connectors into their respective ports on the back of the Switch Panel.

USB ports #1 through #3 (see diagram) can be used in this configuration.

-Plug the Dual USB-A Connector and the Dual USB-B Connectors into each of the Dual USB Ports on the motherboard.

1)Verify the location and the layout of the USB headers from the motherboard manual.

2)Color codes

VCC : red (yellow), D- : white (orange), D+ : green (blue), GND : black

ZALMAN TNN 500AF manual To Sacrifice the Remote Control Function