Fujitsu U810 manual Security Menu Setting the Security Features, Boot, Exit

L i f e B o o k U 8 1 0 N o t e b o o k B I O S

SECURITY MENU - SETTING THE SECURITY FEATURES

The Security menu allows you to set up the data security features of your notebook to fit your operating needs and to view the current data security configuration. Follow the instructions for Navigating Through the Setup Utility to make any changes.

The following tables show the names of the menu fields for the Security menu and its submenus, all the options for each field, the default settings and a description of the field's function and any special information needed to help understand the field's use. The default condition is no passwords required and no write protection.

Remember your passwords! If you set and forget your User and Master hard disk passwords, Fujitsu Computer Systems service representatives (1-800-8FUJITSU) may not be able to reset it. You may lose data and have to replace your system board or hard disk drive.

■Entering a password incorrectly 3 times in a row causes the keyboard and mouse to be locked out and the warning

[System Disabled] to be displayed. If this happens, restart the computer by turning off and on the power with the power switch and use the correct pass- word on reboot.

■If you make an error when re-entering the password a Warning will display on the screen. To try again press [Enter], then retype the password. Press [Esc] to abort the password setting process.

			PhoenixBIOS Setup Utility
Main		Advanced	Security	Boot		Info	Exit
	Supervisor Password Is:			Clear			Item Specific Help
	User Password Is:			Clear			Press <Enter> key to
	Set Supervisor Password			[		]	set Supervisor Password
					Enter
	Set User Password			[Enter]			to enable any password
	Minimum User Password Length			[0]			features.
	Password on Boot:			[Disabled]			Then password entry is
	On Automatic Wake up:			[Disabled]
	KB Lock on Resume:			[Disabled]			required to enter BIOS
	Boot from Removable Media:			[All]			Setup.
	Flash Write:			[Enabled]
▲	Hard Disk Security
▲	Owner Information
▲	Security Chip Setting

F1	Help	Select	Item
ESC	Exit	Select	Menu

-/SpaceChange Values Enter Select ▲ Sub-Menu

F9 Setup Defaults

F10 Save and Exit

Figure 11. Security Menu

18