L i f e B o o k U 8 1 0 N o t e b o o k B I O S
LifeBook U Series Notebook BIOS
BIOS SETUP UTILITY
The BIOS Setup Utility is a program that sets up the operating environment for your notebook. Your BIOS is set at the factory for normal operating conditions, therefore there is no need to set or change the BIOS environment to operate your notebook.
The BIOS Setup Utility configures:
■Device control feature parameters, such as changing I/O addresses and boot devices.
■System Data Security feature parameters, such as passwords.
Using the TrustedCore Menu
When the Fujitsu logo appears on the screen. press the [Enter] key or click on the left mouse or touchpad button; the TrustedCore Menu will appear.
The TrustedCore Menu provides shortcuts to the following menus and information screens:
■BIOS Setup
■Diagnostic Screen
■Boot Menu
■Diagnostic Program
■Patent Information
■System Information
■Continue Booting
The menu opens with BIOS Setup highlighted. Click the [Enter] button to open the BIOS Setup Utility.
The Boot Menu can also be invoked by pressing the [F12] key when the Fujitsu logo appears on the screen.
You can go directly to the BIOS Setup Utility by pressing the [F2] key once the Fujitsu logo appears on the screen. This will open the main menu of the BIOS Setup Utility with the current settings displayed.
1. To select a menu, while holding the [Fn] button, use the left/right cursor keys:
2. To select a field within a menu or a submenu, while holding the [Fn] button, use the up/down cursor keys:
3.To select the different values for each field, press the [Spacebar] or [+] to change to the next lower selec- tion and [F5] or
4.To activate a submenu press the [Enter] key.
5.To return to a menu from a submenu, press the [Esc] key.
6.To go to the Exit menu from any other menu, press the [Esc] key.
■Selecting a field causes a help message about that field to be displayed on the
■Pressing the Enter key with the highlight on a selection that is not a submenu or auto selection will cause a list of all options for that item to be displayed. Pressing the Enter key again will select the highlighted choice.
7.Pressing the [Fn]+[F9] key resets all items in the BIOS to the default values.
8.Pressing the [Fn]+[F10] key saves the current configuration and exits the BIOS Setup Utility. You will be asked to verify this selection before it is executed.
9.Pressing the [Fn]+[F1] key gives you a general help screen.
Navigating through the Setup Utility
The BIOS setup utility consists of six menus: Main, Advanced, Security, Boot, Info, and Exit. This document explains each menu in turn, including all submenus and setup items.
The following procedures allow you to navigate the setup utility menus:
Entering the Setup Utility After a Configuration Change or System Failure
If there has been a change in the system configuration that does not agree with the parameter settings stored in your BIOS memory, or there is a failure in the system, the system beeps and/or displays an error message after the Power On Self Test (POST). If the failure is not too severe, it will give you an opportunity to modify the setup utility settings, as described in the following steps:
2