Fujitsu S6231 manual Secondary Master Submenu of the Main Menu, Cd-Rom

L i f e B o o k S S e r i e s N o t e b o o k B I O S

Secondary Master Submenu of the Main Menu

The Secondary Master submenu is for the internal CD- ROM drive. The drive type is displayed on this menu as well as the Main menu. Your notebook auto-senses the characteristics of the internal CD-ROM Drive installed.

You will not need to modify these settings; they are displayed for your reference.

Note that actual drive labels shown may vary.

PhoenixBIOS Setup Utility

Main

Secondary Master [MATSHITADVD-RAM UJ-830S -(SM)]		Item Specific Help
Type:	[Auto]	Select ATA/ATAPI drive
		installed here.
Multi-Sector Transfers:	[Disabled]
LBA Mode Control:	[Disabled]	[Auto]
Transfer Mode:	[Standard]	The BIOS auto-types the
Ultra DMA Mode:	[Disabled]	drive on boot time.
		Except [Auto]
		You enter parameters of
		the drive.
		[None]
		The drive is disabled.

F1	Help	Select	Item
ESC	Exit	Select	Menu

-/Space	Change	Values
Enter	Select	▲ Sub-Menu

F9 Setup Defaults

F10 Save and Exit

Figure 3. Primary Slave Submenu

Table 3: Fields, Options and Defaults for the Primary Slave Submenu of the Main Menu

Menu Field	Options	Default	Description
Type:	• Auto	[Auto]	Selects the ATA/ATAPI device type. Select Auto to have the
	• None		type automatically identified by the BIOS at POST. If None
	• CD-ROM		is selected, all of the following Set-up items do not appear.
	• Hard Disk		Select CD-ROM or Hard Disk for appropriate drive type
			installed at this connection.
Multi-Sector	• Disabled	[Disabled]	This option cannot be changed when Auto is selected.
Transfers:	• 2 Sectors		Specify the number of sectors per block for multiple sector
	• 4 Sectors		transfer.
	• 8 Sectors
	• 16 Sectors
LBA Mode Con-	• Disabled	[Disabled]	Enables or disables Logical Block Addressing in place of
trol:	• Enabled		Cylinder, Head, Sector addressing. This option cannot be
			changed when Auto is selected.

8