Security Menu Setting the Security Features

S e c u r i t y M e n u

SECURITY MENU – SETTING THE SECURITY FEATURES

The Security menu allows you to set up the data security features of your notebook to fit your operating needs and to view the current data security configuration. Follow the instructions for Navigating Through the Setup Utility to make any changes. (See Navigating Through the Setup Utility on page 2 for more information)

The following tables show the names of the menu fields for the Security menu and its submenus, the options for each field, the default settings and a description of the field's function and any special information needed to help understand the field's use. The default condition is no passwords required and no write protection.

C A U T I O N

Entering a password incorrectly three times in a row will cause the keyboard and mouse to be locked out and the warning [System Disabled] to be displayed. If this happens, restart the computer by turning off and on the power with the power switch and use the correct password on reboot.

P O I N T

■If you set a password, write it down and keep it in a safe place. If you forget the password you will have to contact your support representative to regain access to your secured functions and data.

■If you make an error when re-entering the password a [Warning] will be displayed on the screen. To try again press the [Enter] key and then retype the pass- word. Press the [Esc] key to abort the password set- ting process.

■If the Password on Boot is Disabled you will not have to type your password upon resuming the system from the Suspend or Save-to-Disk modes.

		PhoenixBIOS Setup Utility
Main	Advanced	Security	Boot	Info	Exit

Supervisor Password Is:			Clear		Item Specific Help
Supervisor Password Is:			Clear
User Password Is:			Clear
					Press <Enter> key to
Set Supervisor Password			[Enter]		set Supervisor Password
Set User Password			[Enter]		to enable any password
Minimum User Password Length:			[0]		features.
Password on Boot:			[Disabled]		Then password entry is
On Automatic Wake up:			[Disabled]		required to enter BIOS
KB Lock on Resume:			[Disabled]		Setup.
Boot from Removable Media:			[All]
▲ Hard Disk Security
▲
Owner Information
Security Panel On Resume:			[Enabled]

F1	Help	Select	Item
ESC	Exit	Select	Menu

-/SpaceChange Values Enter Select ▲ Sub-Menu

F9 Setup Defaults

F10 Save and Exit

Fujitsu S6120D manual Security Menu Setting the Security Features, Boot Info Exit