Ports and operating elements
Removing and installing the battery
Only use batteries approved by Fujitsu Siemens Computers for your notebook. Never use force when inserting or removing a battery.
Make sure that no foreign bodies get into the battery connections.
Removing the battery
►Switch the notebook off and pull the power plug out of the mains socket.
►Close the LCD screen so that it locks into place.
►Disconnect all cables connected to the notebook.
►Turn your notebook over and place it on a stable, flat and clean surface. If necessary, lay an
1 |
2 |
3 |
►Slide the release button in direction of the arrow (1).
►Slide the battery lock (2) in the direction of the arrow as far as possible and hold it in place.
►Remove the battery from the battery compartment (3).
16 |