Fujitsu S-5582 manual Factory Installed Values for Power Saving Profiles, Auto Suspend Timeout

					P o w e r M e n u
Table 17: Fields, Options and Defaults for the Power Menu
Menu field	Options		Default	Description
Auto Suspend	■	Off	[15 Minutes]	Sets the length of time without any I/O activity before your note-
Timeout:	■	5 to 60 minutes		book goes into Suspend mode. If you choose a factory combination
				of parameters this field will display that setting. If you choose to
				customize the parameters you will be able to set this yourself. Off
				has no inactivity suspension.
Suspend Mode:	■	Suspend	[Suspend]	Sets the form of suspension state. If you choose Suspend, you will
	■	Save to Disk		suspend operation with power to system memory, and everything
				else powered down or in a very low power state. If you choose
				Save-to-Disk your notebook will save all of system memory and
				the operating parameters to the hard drive before turning your
				notebook to the pseudo-off condition.
Auto Save	■	Off	[Off]	When set to After 1 Hour your notebook will automatically
To Disk:	■	After 1 Hour		save all of system memory and the operating parameters to the
				hard drive and go to the pseudo-off if you leave your notebook in
				Suspend mode for an hour.
Resume On	■	Off	[Off]	Sets whether or not to Resume from a suspension state when a
Modem Ring:	■	On		message is received by telephone line. This feature will not operate
				if the Save-to-Disk mode is enabled. This feature applies to internal
				and external modems.
Resume On Time:	■	Off	[Off]	Sets whether or not to resume from a suspension state at a
	■	On		designated time. This feature is available from either the Suspend
				mode or the Save-to-Disk mode.
Resume Time:	■	00:00:00 to	[00:00:00]	Sets the designated time, on a 24-hour clock, when the notebook
		23:59:59		is to automatically resume operation from the Suspend state.
				The format of the clock setting is hours:minutes:seconds. Each
				segment of the time is set separately, either by incrementing or by
				typing in the numbers. You move between the segments with the
				[Tab] key or the [Shift]+[Tab] keys. This only applies when Resume
				on Time is set to On.
Advanced	–—		–—	When selected, opens the Advanced Features submenu which
Features:				allows setting additional power saving parameters.
Factory Installed Values for Power Saving Profiles
			Hard Disk	Display Timeout	Standby Timeout	Auto Suspend
			Timeout			Timeout
Customized:			Off	Off	4 Minutes	15 Minutes
Maximum Power Savings:			30 Seconds	2 Minutes	1 Minute	5 Minutes
Maximum Performance:			Off	Off	Off	15 Minutes
Disabled:			Off	Off	Off	Off
Sample Customized Profile: (To get even			2 Minutes	1 Minute	1 Minute	5 Minutes
better battery life keep the display and
volume settings as low as possible and use
the sample customized profile.)

31