L i f e B o o k P S e r i e s B I O S
Table 2: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu
Menu Field | Options | Default | Description |
|
|
|
|
Sectors: | • A number | This item appears only when the type is identified as Hard Disk. | |
| between 0 |
| When Hard Disk is selected, you can change the value. This field |
| and 63 |
| is changed by incrementing (pressing the [Spacebar]) or by typing |
|
|
| |
|
|
| in the number. |
|
|
|
|
Maximum | • Display only | Displays the maximum capacity of the drive calculated from the | |
Capacity: |
|
| parameters of the hard disk when Hard Disk is selected. |
|
|
|
|
Multi- | • Disabled | [16 Sectors] | This option cannot be changed when Auto is selected. Specify the |
Sector | • 2 Sectors |
| number of sectors per block for multiple sector transfer. |
Transfers: | • 4 Sectors |
|
|
| • 8 Sectors |
|
|
| • 16 Sectors |
|
|
| • 32 Sectors |
|
|
| • 64 Sectors |
|
|
| • 128 Sectors |
|
|
|
|
|
|
LBA Mode | • Disabled | [Enabled] | Enables or disables logical Block Addressing in place of Cylinder, |
Control: | • Enabled |
| Head, Sector addressing. This option cannot be changed when |
|
|
| Auto is selected. |
|
|
|
|
PIO | • Standard | [Fast PI0 4] | Selects the method for moving data to/from the drive. Autotype |
Transfer | • Fast PIO 1 |
| the drive to select the optimum transfer mode. This option cannot |
Mode: | • Fast PIO 2 |
| be changed when Auto is selected. |
| • Fast PIO 3 |
| cally set to mode 1 for Fast PIO 1, Fast PIO 2, Fast PIO 3, and set |
| • Fast PIO 4 |
| to mode 2 for Fast PIO 4 / DMA. |
|
|
|
|
DMA | • Disabled | [Ultra | Selects the method for moving data to/from the drive. Autotype |
Transfer | • Multiword | DMA 4] | the drive to select the optimum transfer mode. This option cannot |
Mode: | DMA 1 |
| be changed when Auto is selected. |
| • Multiword |
|
|
| DMA 2 |
|
|
| • Ultra DMA 0 |
|
|
| • Ultra DMA 1 |
|
|
| • Ultra DMA 2 |
|
|
| • Ultra DMA 3 |
|
|
| • Ultra DMA 4 |
|
|
|
|
|
|
6