L i f e B o o k P S e r i e s B I O S
Table 3: Fields, Options and Defaults for the Secondary Master Submenu of the Main Menu
Menu Field | Options | Default | Description |
|
|
|
|
Sectors: | • A number | This item appears only when the type is identified as Auto or Hard | |
| between 0 |
| Disk. When Hard Disk is selected, you can change the value. This |
| and 63 |
| field is changed by incrementing (pressing the [Spacebar]) or by typ- |
|
|
| |
|
|
| ing in the number. |
|
|
|
|
Maximum | • Display only | Displays the maximum capacity of the drive calculated from the | |
Capacity: |
|
| parameters of the hard disk when Hard Disk is selected. |
|
|
|
|
• Disabled | [Disabled] | This option cannot be changed when Auto is selected. Specify the | |
Transfers: | • 2 Sectors |
| number of sectors per block for multiple sector transfer. |
| • 4 Sectors |
|
|
| • 8 Sectors |
|
|
| • 16 Sectors |
|
|
| • 32 Sectors |
|
|
| • 64 Sectors |
|
|
| • 128 Sectors |
|
|
|
|
|
|
LBA Mode | • Disabled | [Disabled] | Enables or disables logical Block Addressing in place of Cylinder, |
Control: | • Enabled |
| Head, Sector addressing. This option cannot be changed when Auto |
|
|
| is selected. |
|
|
|
|
PIO Transfer | • Standard | [Disabled] | Selects the method for moving data to/from the drive. Autotype the |
Mode: | • Fast PIO 1 |
| drive to select the optimum transfer mode. This option cannot be |
| • Fast PIO 2 |
| changed when Auto is selected. |
| • Fast PIO 3 |
| set to mode 1 for Fast PIO 1, Fast PIO 2, Fast PIO 3, and set to |
| • Fast PIO 4 |
| mode 2 for Fast PIO 4 / DMA. |
|
|
|
|
DMA | • Disabled | [Disabled] | Selects the method for moving data to/from the drive. Autotype the |
Transfer | • Multiword |
| drive to select the optimum transfer mode. This option cannot be |
Mode: | DMA 1 |
| changed when Auto is selected. |
| • Multiword |
|
|
| DMA 2 |
|
|
| • Ultra DMA 0 |
|
|
| • Ultra DMA 1 |
|
|
| • Ultra DMA 2 |
|
|
| • Ultra DMA 3 |
|
|
| • Ultra DMA 4 |
|
|
|
|
|
|
Exiting from Main Menu
When you have finished setting the parameters on this menu, you can either exit from the setup utility, or move to another menu. If you wish to exit from the setup utility, press the [Esc] key or use the cursor keys to go to the Exit menu. If you wish to move to another menu, use the cursor keys.
8