Fujitsu N3530 manual Hard Disk Security Submenu of the Security Menu, Password

S e c u r i t y M e n u

Hard Disk Security Submenu of the Security Menu

The Hard Disk Security Submenu is for configuring hard disk security features.

InsydeH20 Setup Utility

Information Main Advanced Security Boot Exit

[Hard Disk	Security]
Drive0 Password:		Clear
Set Drive0	Password	<Enter>
Password Entry on Boot		<Enabled>

Press <Enter> key to set Hard Disk Password. The hard disk is locked with the password. Data in the locked disk cannot be read on other systems.

Up/Dn Select Boot Device

<>		Select Screen
		Select	Item
Enter		Select	▲ Submenu
F1	=	Help
F9	=	Setup Defaults
F10 =		Save and Exit
Esc =		Exit

Figure 11. Hard Disk Security Submenu

Table 11: Fields, Options and Defaults for the Hard Disk Security Submenu of the Security Menu

Menu Field	Options		Default	Description
Drive0 Password Is:	---		Clear	The default is Clear. When the Drive0 Password has been set in the field below, the
				field changes to Set.
Set Drive0	---		[Enter]	When the Drive0 Password has been set, the field can be changed. When enabled,
Password:				the hard disk is locked with the password. Data in the locked disk cannot be read on
				any systems other than the original system on which it is locked or systems that
				have the identical password setting.
Password Entry	■	Disabled	[Enabled]	When disabled, the master password entry is not required before booting the oper-
on Boot:	■	Enabled		ating system, but the hard disk is still password-protected without password entry.

17